Measuring bend-curvature and determining bend-direction simultaneously using long period fiber gratings

Yiping Wang,Yunjiang Rao

2004-01-01

Abstract:A novel long period fiber gratings sensor that can, not only measure the applied bend-curvature directly, but also determine the bend-direction is proposed and demonstrated in this paper. © 2003 Optical Society of America.

What problem does this paper attempt to address?

A Novel Long Period Fiber Grating Sensor Measuring Curvature and Determining Bend-Direction Simultaneously

YP Wang,YJ Rao

DOI: https://doi.org/10.1109/jsen.2005.844335

IF: 4.3

2005-01-01

IEEE Sensors Journal

Abstract:A novel long period fiber-grating (LPFG) sensor that can not only measure curvature directly, but also determine every bend-direction within the circular range of 0/spl deg/-360/spl deg/, is proposed and demonstrated in this paper. Such a bend-sensor consists of one LPFG induced by a UV laser and two LPFGs induced by high-frequency CO/sub 2/ laser pulses. The curvature is measured by the UV laser-induced LPFG whose bend-sensitivity is independent of the bend-directions, and the bend-direction is determined by the CO/sub 2/ laser-induced LPFGs whose bend-sensitivities depend strongly on the curved directions. In addition, the unique bend-characteristics of LPFGs induced by high-frequency CO/sub 2/ laser pulses are demonstrated.
Long Period Fiber Grating Sensors Measuring Bend-curvature and Determining Bend-direction Simultaneously

Yi-ping WANG,Jian-ping CHEN,Yun-jiang RAO

DOI: https://doi.org/10.3321/j.issn:1005-0086.2005.10.001

2005-01-01

Abstract:It is discovered independently that the bend-sensitivity of long period fiber gratings(LPFGs) written by the high-frequency CO_2 laser pulses depends strongly on the bending direction.That is,the bend-sensitivities of the resonant wavelength and amplitude are various to different bend-directions.Furthermore,there are two orientations corresponding the most bend-sensitive,and other two orientations corresponding the most bend-insensitive.Based on the unique bend characteristics,it is proposed and demonstrated that a novel long period fiber grating sensor can measure the bend-curvature and determine bend-direction simultaneously.Such a bend sensor consists of two LPFGs fabricated by the high-frequency CO_2 laser pulses and one LPFG fabricated by other fabrication technique.
Bend Sensors with Direction Recognition Based on Long-Period Gratings Written in D-shaped Fiber

DH Zhao,XF Chen,KM Zhou,L Zhang,I Bennion,WN MacPherson,JS Barton,JDC Jones

DOI: https://doi.org/10.1364/ao.43.005425

IF: 1.9

2004-01-01

Applied Optics

Abstract:The curvature- or bend-sensing response of long-period gratings (LPGs) UV inscribed in D-shaped fiber has been investigated experimentally. Strong fiber-orientation dependence of the spectral response when such LPGs are subjected to bending at different directions has been observed and is shown to form the basis for a new class of single-device sensor with vector-sensing capability. Potential applications utilizing the linear response and unique bend-orientation characteristics of the devices are discussed.
Implementation of Vectorial Bend Sensors Using Long-Period Gratings UV-inscribed in Special Shape Fibres

DH Zhao,KM Zhou,XF Chen,L Zhang,I Bennion,G Flockhart,WN MacPherson,JS Barton,JDC Jones

DOI: https://doi.org/10.1088/0957-0233/15/8/037

2004-01-01

Abstract:We report the implementation of vector bending sensors using long-period gratings (LPGs) UV-inscribed in flat-clad, four-core and D-shaped fibres. Our experiments reveal a strong fibre-orientation dependence of the spectral response when such LPGs are subjected to dynamic bending, which provided an opportunity to realize curvature measurement with direction recognition.
Dual-dip Long-Period Fiber Gratings for Directional Bending Measurement

Yunhe Zhao,Ziyang Hua,Mengxue Tang,Huiqin Peng,Siyu Chen,Yuehui Ma,Yunqi Liu,Zuyuan He

DOI: https://doi.org/10.1016/j.optcom.2023.129901

IF: 2.4

2023-01-01

Optics Communications

Abstract:A high-sensitivity bending sensor based on dual-dip long period fiber gratings (LPFGs) in a single-mode fiber is proposed. The length of the gratings is very short only 7.2 mm. The asymmetric perturbation in fiber is generated during the fabrication, which makes the dual-dip LPFGs show different bending sensing characteristics at opposite directions. Meanwhile, the highest bending sensitivity of -35.91 nm/m- 1 and -20.74 dB/m-1 can be obtained at bending directions of 0 degrees and 180 degrees, respectively. Furthermore, the torsion and temperature sensing characteristics are investigated experimentally. The torsion sensitivities follow sine function showing potential for directional sensing. The temperature sensitivities are 41.9 p.m./degrees C and 45.1 p.m./degrees C are close, which can eliminate the cross-sensitivity to temperature.
Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Xiuli Jiang,Qishuang Zhang,Qiang Ling,Yang Li,Jie Xu,Yusheng Zhang,Haiyun Chen,Zhengtian Gu,Zhangwei Yu,Zuguang Guan,Daru Chen

DOI: https://doi.org/10.1109/jsen.2024.3355162

IF: 4.3

2024-01-01

IEEE Sensors Journal

Abstract:An integrated all-fiber sensor based on ring-core fiber (RCF)-embedded long-period fiber grating (LPFG) cascaded RCF-Mach-Zehnder interferometer (MZI) for measuring curvature and temperature is proposed and demonstrated experimentally. The RCF-embedded LPFG section is fabricated by periodically embedding hundreds of micrometers sized RCF into SMF by employing the mature, low-cost cleaving splicing method (CSM). Due to the large core diameter mismatch, the energy within the core is exceeded into the cladding mode more effectively, and the periodic refractive index modulation gives our sensor has a compact size with only three-period SMF-RCF structures and a total length of 2.8 mm. To measure curvature and temperature simultaneously, an RCF-based MZI with an RCF length of 1 mm is cascaded behind LPFG by employing the CSM. Thus, there are two dips corresponding to LPFG and MZI occur in the transmission spectrum. The dips show different responses to curvature and temperature changes. The maximum curvature and temperature sensitivities of the two dips are 26.61, -1.67 nm/m(-1), 0.053 nm/.C, and 0.059 nm/degrees C, respectively. By utilizing a 2 x 2 matrix, simultaneous measurement of curvature and temperature can be achieved. The integrated all-fiber sensor has a compact size, low cost, and high sensitivity possessing more competitivity in complex, harsh applications.
Simultaneous Measurement of Curvature Vector and Temperature Based on Composite Gratings Inscribed on D-Shaped Fiber

Liang Ma,Yanxin Zhang,Weigang Zhang,Lingxin Kong,Zhe Li,Han Gao,Tao Liao,Jingchuan Zhang,Juntong Ge,Xinlei Zhao,Huizi Ma,Tieyi Yan

DOI: https://doi.org/10.1109/jsen.2021.3119967

IF: 4.3

2021-11-15

IEEE Sensors Journal

Abstract:A novel two-parameter fiber sensor has been demonstrated, consisting of D-shaped composite fiber gratings (DCFG) which includes long period fiber grating (LPFG) and fiber Bragg grating (FBG) inscribed on D-shaped fiber. LPFG is inscribed on the side of D-shaped fiber by a high-frequency CO2 laser. On account of the asymmetry of the structure in 90° and 270° and refractive index modulation (RIM) in 0° and 180°, the sensor can recognize the bending directions. In the theory, it is proved that by adjusting the thickness of D-shaped fiber, the bending sensitivity can be enhanced in 90° and 270° directions. In the experiments, the fiber sensor achieves the sensitivity of curvature up to 13.70 nm/m−1, which is nearly two times as the similar structure without D-shaped fiber. The curvature and temperature sensitivities of LPFG and FBG are different in DCFG, so the proposed sensor can realize simultaneously measurement of curvature vector and temperature.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Helical Long-Period Gratings in Three-Core Fiber for Directional Curvature and Torsion Measurements

Yunhe Zhao,Xin Wang,Yan Jiang,Ziyang Hua,Chengbo Mou,Yunqi Liu,Zuyuan He

DOI: https://doi.org/10.1109/jlt.2024.3401480

IF: 4.7

2024-08-26

Journal of Lightwave Technology

Abstract:Yunhe Zhao, Xin Wang, Yan Jiang, Ziyang Hua, Chengbo Mou, Yunqi Liu, Zuyuan He We proposed a dual-parameter sensor designed for detecting directional curvature and torsion. The sensor was fabricated utilizing CO_2 ... [J. Lightwave Technol. 42, 6163-6170 (2024)]

engineering, electrical & electronic,optics,telecommunications
Multiparameter Measurements for Bending, Torsion, and Temperature by Long-Period Gratings in Three-Core Fiber

Yunhe Zhao,Xin Wang,Huiqin Peng,Mengjiao Ding,Siyu Chen,Yunqi Liu,Zuyuan He

DOI: https://doi.org/10.1109/jsen.2023.3336056

IF: 4.3

2024-01-01

IEEE Sensors Journal

Abstract:In this article, it is reported on a multiparameter sensor for measuring bending, torsion, and temperature. The sensor is formed from long-period gratings (LPGs) induced in a linearly arranged three-core fiber (TCF) using the electric arc-discharge technique. This sensor could realize the simultaneous measurement for curvature magnitudes and discriminate bending direction because of the linearly distributed fiber cores of TCF and high polarization-dependent loss (PDL) of TCF-LPGs. The bending reactions in various directions exhibit a high degree of linearity in the curvature region of 0.249-0.8731 m(-1) . The obtained bending sensitivities are noticeably distinct and adhere to sine function relationship with the bending direction. At the direction of 0 degrees, the bending sensitivities of dual resonances in TCF-LPGs reach the highest value of -7.58 and -8.83 nm/ m(-1) , respectively, and the measured temperature sensitivities are 0.023 and 0.107 nm/degrees C, respectively. Considering dual resonances response different coefficients to different parameters, the simultaneous measurement of temperature and bending could be achieved. Moreover, the torsional characteristics of the TCF-LPGs adhere to sine function as well, which shows potential for directional torsion sensing. The suggested TCF-LPGs offer great deal of promise in the area of multiparameter sensing measurement.
Multiparameter Sensor Based on Long-Period Grating in Few-Mode Ring-Core Fiber for Vector Curvature and Torsion Measurement

Yunhe Zhao,Shiqi Chen,Yutao Guo,Yan Jiang,Siyu Chen,Chengbo Mou,Yunqi Liu,Zuyuan He

DOI: https://doi.org/10.1016/j.optlastec.2024.110879

2024-01-01

Abstract:With the rapid development of optical fiber sensor in physical measurement, it is of practical significant to realize multi -parameter measurement. In this work, we proposed and demonstrated a multiparameter sensor for curvature, torsion and temperature. The sensor is formed from CO 2 laser -inscribed long -period grating (LPG) in fewmode ring -core fiber (RCF), which can convert fundamental mode to LP 11 mode. One -side inscription enhances asymmetric index modulation in fiber, resulting in directionally sensitive to bend by intensity interrogation. The curvature sensitivities in various bending directions perform linearity in curvature range of 5 - 9.466 m -1 . Curvature sensitivities are related to the bending directions. The intensity sensitivity achieves - 0.584 dB/m -1 , 0.879 dB/m -1 , and - 0.735 dB/m -1 , respectively. And torsion sensitivity from -6.98 rad/m to 6.98 rad/m displays linearity with -0.554 dB/(rad/m). The measured influence of temperature can be negligible. The proposed RCF-LPG could not only be used as high -efficiency mode converter in mode division multiplexing systems but also be potential in few -mode fiber based multiparameter sensing fields.
Two-Dimension Vector Bending Sensor Based on Helical Long-Period Gratings in Four-core Fiber

Huiqin Peng,Yunhe Zhao,Yuehui Ma,Yongsheng Yang,Yunqi Liu,Zuyuan He

DOI: https://doi.org/10.1109/ACP55869.2022.10089066

2022-01-01

Abstract:In this study, the fabrication and characterization of a two-dimension vector bending sensor based on helical long-period gratings (HLPGs) in four core fiber (FCF) are demonstrated. The three outer cores of FCF are distributed at a regular triangle, and one inner core is distributed in the center of the FCF. The HLPGs with the period of 435 μm and period number of 60 were fabricated in FCF by a CO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</inf> laser. Thanks to the special spatial distribution of the cores in FCF, the proposed FCF-HLPGs can achieve vector bending sensing. In the range from 0.7855 m −1 to 1.8157 m −1 , the bending sensing characteristics exhibit different sensitivities in the directions of 0° and 180°. The bending sensitivity of FCF-HLPGs at the direction of 0° and 180° are 7.27 nm/m −1 and -11.39 dB/m −1 , 21.37 nm/m −1 and -3.87 dB/m −1 , respectively. The FCF-HLPGs have a potential application in the field of vector bend sensing.
Bend-insensitive long-period fiber grating sensors

Y.P Wang,Y.J Rao,Z.L Ran,T Zhu,X.K Zeng

DOI: https://doi.org/10.1016/S0143-8166(02)00141-0

IF: 5.666

2004-01-01

Optics and Lasers in Engineering

Abstract:A novel bend-insensitive long-period fiber grating (LPFG) sensor written using focused CO2 laser pulses is demonstrated, for the first time, to our knowledge. It is found that the central wavelength shift of such a LPFG is only −0.018nm even for a curvature of 1.1m−1 at the most bend-insensitive position of the LPFG. Experimental results show that the bend sensitivity of the central wavelength of the LPFG has a periodic distribution along its circular directions. Such a bend-insensitive sensor could be used to solve the problem of cross-sensitivity between bend and other measurands, such as temperature, strain or refractive index, which is an unsolved problem for LPFG sensors in practice. In addition, the bend sensitivity of the LPFG can be adjusted by selecting its circular positions.
An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Lei Ding,Jian Li,Yi Deng,Shi Xiao,Jun Wang,Yukang Tian

DOI: https://doi.org/10.1109/jsen.2019.2920622

IF: 4.3

2019-01-01

IEEE Sensors Journal

Abstract:In this paper, we present a highly sensitive inline fiber curvature sensor based on an eccentric core fiber (ECF) and off-axis air cavity Fabry-Pérot interferometer (OACFPI). This ECF-based bending sensor is fabricated by fusion-splicing a section of ECF between a single-mode fiber and an off-axis air cavity fiber. Due to the location of the core in the ECF, a bend applied to the ECF-based OACFPI leads to elongation or shortening of the optical path length in the air cavity, which makes the system suitable for bending measurement. To analyze bending characteristics, three ECFs with different eccentric core locations are investigated separately. In addition, a swept source is employed for measurement. The experimental results demonstrate that, the bending sensitivities of the sensors at the two opposite most-sensitive directions are 0.241 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), 0.131 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and 0.0807 nm/ $\text{m}^{\mathrm {\mathbf {-1 }}}$ (sensor 3), and −0.245 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), −0.156 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and −0.077 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 3). The temperature sensitivities of the sensors are 0.84 pm/°C, 0.92 pm/°C, and 0.94 pm/°C, respectively. The proposed sensors are compact and versatile, and are expected to have potential applications in biomedical sensing.
Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

Jing Kong,Xiaowei Ouyang,Ai Zhou,Haihu Yu,Libo Yuan

DOI: https://doi.org/10.1109/jlt.2016.2565540

IF: 4.7

2016-07-15

Journal of Lightwave Technology

Abstract:A novel fiber Bragg grating (FBG) structure based on an eccentric core fiber (ECF) and a single-mode fiber (SMF) was proposed and experimentally demonstrated for distinguishing the bending effect from the axial strain effect and measuring the pure directional bending. The structure is fabricated by writing a FBG on the fusion splice junction between an ECF and a SMF. The FBG formed on the ECF-SMF junction has two different resonant peaks because of the different refractive indices of the two fibers. The peak relating to the ECF is sensitive to both directional bending and axial strain, while the peak corresponding to the SMF is only sensitive to strain. By using the unique FBG structure, one can directly know whether a bending is accompanied by an axial strain, and can obtain both the direction and curvature of the bending. Experimental results show that the bending sensitivities of the FBG in the ECF part are 49.3 and 50.3 ${\rm{pm}}/{{\rm{m}}^{ - 1}}$ at directions of 0 and 180, respectively, and the strain sensitivities of the FBG in the ECF and SMF are 0.74 and 0.70 pm/, respectively.

engineering, electrical & electronic,optics,telecommunications
A Simultaneous Measurement Sensor for Temperature and Curvature Based on Congruent Quasi-Helical Long-Period Fiber Grating

Haoen Sun,Zaiqiang Gong,Xiangjie Qin,Wenhao Shen,Haiqin Ma,Qiuhong Pan,Chengguo Tong,Cheng Yuan

DOI: https://doi.org/10.3390/s24175621

IF: 3.9

2024-09-01

Sensors

Abstract:This article presents a long-period fiber-grating sensor based on a congruent quasi-helical structure (CQH-LPFG) with the two-parameter measurement of both temperature and curvature. The CQH-LPFG sensor was manufactured using a high-frequency CO2 laser, and an innovative quasi-helical structure was introduced into the two-parameter measurement of the temperature and curvature of the optical fiber sensor with excellent results. The experiment and analysis demonstrate that the curvature sensitivities of the three resonance peaks in the 1440 nm to 1540 nm transmission spectrum were 11.88 nm/m−1, 8.05 nm/m−1, and 11.11 nm/m−1, and the curvature varied ranging from 0.156 m−1 to 0.494 m−1. The three resonance peaks showed temperature responsivities of 29.87 pm/°C, 24.65 pm/°C, and 36.85 pm/°C, respectively, and the linear fit was of excellent quality. In the case of measuring both curvature and temperature changes simultaneously, the resonant peak wavelength of the CQH-LPFG sensor was demodulated through matrix analysis, with dip A and dip C providing superior simultaneous measurements. These features make it a promising candidate for applications such as engineering machinery and the health inspection of buildings.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Angularly Cascaded Long-Period Fiber Grating for Curvature and Temperature Detection

Anping Xiao,Jie Du,Qiang Ling,Yao Chen,Zhengtian Gu,Haiyun Chen,Zhangwei Yu,Barerem-Melgueba Mao,Zuguang Guan,Daru Chen

DOI: https://doi.org/10.3390/s24010184

IF: 3.9

2023-12-29

Sensors

Abstract:A high-sensitivity curvature sensor with dual-parameter measurement ability based on angularly cascaded long-period fiber grating (AC-LPFG) is proposed and experimentally demonstrated, which consists of two titled LPFGs (TLPFGs) with different tilt angles and the same grating period. AC-LPFG was fabricated by using a deep ultraviolet laser and an amplitude-mask in our laboratory. The experimental results show that simultaneous measurement of curvature and temperature can be achieved by monitoring the wavelengths of two resonant peaks for different TLPFGs. The two peaks show opposite shifts with increasing curvature and has a maximum curvature sensitivity of 16.392 nm/m−1. With the advantages of low cost, high sensitivity, and dual-parameter measurements, our sensor has more potential for engineering applications.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Vector Curvature Sensor Based on Asymmetrically Polished Long-Period Fiber Grating

Yiwei Ma,Min Zhao,Chunbo Su,Jing Sun,Xiaofei Li,Ze Yu,LiLi Zhang,Tao Geng

DOI: https://doi.org/10.1016/j.measurement.2022.110997

IF: 5.6

2022-01-01

Measurement

Abstract:In this paper, we experimentally propose and theoretically investigate a two-dimensional vector curvature sensor based on asymmetrically polished long period fiber grating (AP-LPFG). This sensor is fabricated by a high-frequency CO2 laser in order to polish periodic asymmetrical V-shaped grooves on a single mode fiber (SMF). Such grooves efficiently enhances the bending sensitivity of sensor and shorten the length of the structure to 7.39 mm. Experimental results show that the sensitivity of AP-LPFG reaches 30.85 nm/m(-1) in the direction of the X-axis and 0.97 nm/m(-1) in the direction of the Y-axis. Meanwhile, the temperature response of AP-LPFG is carried out, which is 76 pm/degrees C in range of 30-160 degrees C. Moreover, the AP-LPFG has the features of compact length and simple structure, which shows the potential in curvature sensing.
A novel bend-insensitive long-period fiber grating sensor

YP Wang,YJ Rao,ZG Ran,T Zhu,XK Zeng

DOI: https://doi.org/10.1117/12.481952

2002-01-01

Abstract:A novel bend-insensitive LPFG sensor written by high-frequency CO2 laser pulses is demonstrated, for the first time, to our knowledge. Experiment results shows that the bend-sensitivity of the novel LPFG depends strongly on curved orientation. The resonant wavelength shifted merely -0. 018 nm even for a curvature of 1.1 m(-1) at the most bend-insensitive position. Such a bend-insensitive sensor could be used to solve the problem of cross-sensitivity between bend and other measurands, such as temperature, strain or refractive index, which is an unsolved problem for LPFG sensors in practice. In addition, the bend sensitivity of the LPFG can be adjusted by selecting its circular positions.
A Wide Range Curvature Sensor Based on Fiber Ring Laser With a Long-Period Fiber Grating

Lida Li,Hailiang Chen,Xiaoya Fan,Mingqi Gu,Sa Zhang,Ruyue Shi,Zhigang Gao,Yu Zheng,Shuguang Li,Perry Ping Shum

DOI: https://doi.org/10.1109/tim.2024.3436125

IF: 5.6

2024-08-18

IEEE Transactions on Instrumentation and Measurement

Abstract:Long-period fiber grating (LPFG) is a promising curvature sensor due to its high bending sensitivity. In this article, a fiber ring laser (FRL)-based curvature sensor with an LPFG was proposed and experimentally verified. LPFG acted as both a filter and a curvature sensing element. The maximum measurement sensitivity of curvature reached 7.99 dB/m-1 in a wide range of 4.89–13.33 m-1 which was wider than most of previously reported curvature sensors. The bending and filtering characteristics of LPFG were verified by changing its position in FRL. The output wavelength of the FRL could be tuned through the bending of LPFG. The proposed curvature sensor, showing the advantages of a wide measurement range, high resolution, and high sensitivity, has potential applications in monitoring the deformation of surgical instruments, robot arms, and engineering objects.

engineering, electrical & electronic,instruments & instrumentation
Directional Bending Sensor Based on LP11 Mode from Few-Mode Ring-Core Fiber with Long-Period Grating

Yunhe Zhao,Shiqi Chen,Chengbo Mou,Yunqi Liu,Zuyuan He

DOI: https://doi.org/10.1364/cleo_at.2024.jw2a.75

2024-01-01

Abstract:We propose a directional bending sensor based on LP11 mode from few-mode ring-core fiber with CO2-laser-inscribed long-period grating. One-side inscription enhances asymmetric index modulation in fiber, resulting in directionally sensitive to bend by intensity interrogation.

Measuring bend-curvature and determining bend-direction simultaneously using long period fiber gratings

A Novel Long Period Fiber Grating Sensor Measuring Curvature and Determining Bend-Direction Simultaneously

Long Period Fiber Grating Sensors Measuring Bend-curvature and Determining Bend-direction Simultaneously

Bend Sensors with Direction Recognition Based on Long-Period Gratings Written in D-shaped Fiber

Implementation of Vectorial Bend Sensors Using Long-Period Gratings UV-inscribed in Special Shape Fibres

Dual-dip Long-Period Fiber Gratings for Directional Bending Measurement

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Simultaneous Measurement of Curvature Vector and Temperature Based on Composite Gratings Inscribed on D-Shaped Fiber

Helical Long-Period Gratings in Three-Core Fiber for Directional Curvature and Torsion Measurements

Multiparameter Measurements for Bending, Torsion, and Temperature by Long-Period Gratings in Three-Core Fiber

Multiparameter Sensor Based on Long-Period Grating in Few-Mode Ring-Core Fiber for Vector Curvature and Torsion Measurement

Two-Dimension Vector Bending Sensor Based on Helical Long-Period Gratings in Four-core Fiber

Bend-insensitive long-period fiber grating sensors

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

A Simultaneous Measurement Sensor for Temperature and Curvature Based on Congruent Quasi-Helical Long-Period Fiber Grating

Angularly Cascaded Long-Period Fiber Grating for Curvature and Temperature Detection

Vector Curvature Sensor Based on Asymmetrically Polished Long-Period Fiber Grating

A novel bend-insensitive long-period fiber grating sensor

A Wide Range Curvature Sensor Based on Fiber Ring Laser With a Long-Period Fiber Grating

Directional Bending Sensor Based on LP11 Mode from Few-Mode Ring-Core Fiber with Long-Period Grating