Abstract:Commercial fiber Bragg grating (FBG) sensors typically rely on require plastics, acrylates or glues for encapsulation and adhesion, making them susceptible to aging, creep, and high-temperature intolerance. To overcome these issues, this study introduces an electrochemical deposition process aimed at creating adhesive-free sensors by embedding FBGs into metal structures. This approach enhances the operational range and lifespan of the sensor. The embedding method facilitates the detection of bending strains by the FBG. Consequently, a temperature-insensitive inclination sensor is designed and fabricated. Two FBGs are embedded on either side of a metal strip, precisely aligned with its central axis, to measure bending strain. When bending stress is applied to the metal steel, the two FBGs experience opposite strains, causing their central wavelengths to drift in opposite directions. Analyzing the wavelength shift difference between the two FBGs yields a sensor with higher inclination sensitivity and temperature insensitivity. The experimental results indicate that the designed sensor has a high sensitivity of 42.76 pm/°, resolution of 0.0023°, and linearity of 0.9994. Temperature-response tests demonstrate the excellent temperature insensitivity of the fabricated sensor, allowing for reliable operation in high-temperature conditions. Furthermore, this metal encapsulation method exhibits significant potential for expanding the applications of FBGs.

The Experimental Study of Large Range Enhanced Temperature Sensitivity Concerning Fiber Bragg Grating Temperature Sensor

Research on Temperature Compensation of Fiber Bragg Grating Current Sensor

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Highly-sensitive Fiber Bragg Grating Temperature Sensors with Metallic Coatings

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Non-Gel Encapsulation Process of a High Temperature Strain Fiber Bragg Grating Sensor and Its Sensing Properties

Temperature-Insensitive Embedded Metal-Packaged Fiber Bragg Grating Inclination Sensor

Investigation on Temperature Sensitivity of Fiber Bragg Grating Sensor under Global Temperature Variations Experience

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Study on the Optical Characteristic of FBG Temperature Sensor

Fiber Bragg grating temperature sensor for marine application

High Temperature High Sensitivity Optical Fibre Sensor Based on Multimode Fibre Bragg Grating

Accurate Measurement of Large Strain under High-temperature Environment Based on Fiber Bragg Grating

A Novel Fast Response and High Precision Water Temperature Sensor Based on Fiber Bragg Grating

Study on Temperature Characteristics of Optical Fiber Bragg Grating under the 77 K Environment

Study On The Transmission Spectrum Of Fiber Bragg Grating As Temperature Sensor

Temperature Sensing of Metal-Coated Fiber Bragg Grating