Abstract:A ZW-126/D2000-40 type single-break vacuum circuit breaker (VCB) with controlled switching technology is designed and produced in this paper. The results of type tests based on IEC and GB standards are presented. A 126 kV single-break vacuum interrupter (VI) with 3/4 coil axial magnetic field (AMF) contacts is used in the VCB, which can interrupt short currents of 40 kA. The external insulation of the VI is provided by SF6 at 0.1 MPa. In order to match the 126 kV single-break VI and controlled switching device, a long-stroke electro-magnetic force actuator (EMFA) with 16 kN closing holding force and 3.5 m/s average opening speed is designed. Moreover, a position tracking controlled switching device based on closed-loop control using the technology of a fuzzy control algorithm and pulse width modulation is applied to the controlled switching device. This device is applied to control the coil current of EMFA and the electromagnetic force, so as to control the EMFA to follow the ideal position curve. The type tests of 126 kV VCB are all passed according to the IEC62271-100 and GB1984-2014, including dielectric tests, basic short-circuit tests, short-line fault tests, out-of-phase tests, etc. The strong capacitive current breaking capacity and mechanical strength of the VCB are proved by the capacitive current switching test of class C2, electrical endurance test of class E2 and mechanical endurance test of class M2. The electromagnetic compatibility (EMC) tests are passed according to the IEC61000-4. The controlled switching test of capacitive current was successful according to IEC62271-302 and GB/T30846-2014, and the controlled switching accuracy is less than ± 0.5 ms. The test results show that the VCB has excellent performance, which has broad application prospects in special occasions at a 126 kV voltage level, such as a switching capacitor and no-load transformer, etc.

Breaking Capacity Test of Vacuum Circuit Breaker Using Synthetic Test Circuit with Current Zero Forecast

Investigation on the current-zero characteristic of vacuum circuit breakers

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

Design and Implementation of an Auto-Oriented Bidirectional ZCS Hybrid Circuit Breaker

Application of arc breaking simulation in development of extra high voltage SF<sub>6</sub> circuit breaker

Experimental Investigation Into the Synergy of Vacuum Circuit Breaker With Double-Break

Time Series Prediction of Short Circuit Current for Synchronous Control of Synthetic Test Based on Delay Coordinate Embedding

Experimental Study on Fast Isolating Switch with Vacuum Multi-breaks

Research On Synchronous Breaking Technology Of Vacuum Circuit Breaker

Topology, Modeling and Transient Current Transfer Analysis of DC Hybrid Vacuum Circuit Breaker Based on SiC Module

Control strategy and experimental verification of hybrid DC circuit breaker

Study of Arc Interruption Characteristics under Rated Current in Low Voltage Circuit Breakers

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

A Double-Break Current Injection Vacuum DCCB: Principle and Analysis

Research on Contact Structure in Vacuum Interrupter for DC Breaking Capability

A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation

Simulation Research on the Post-arc Dielectric Recovery Characteristics of Multi-break Vacuum Circuit Breakers

Development and type test of ZW-126/D2000-40 vacuum circuit breaker with controlled switching technology

No-Load Dielectric Recovery of the Ultra-Fast Vacuum Switch in Hybrid DC Circuit Breaker

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Flexible Fault Current Adaptation Features of A Novel DC Circuit Breaker Assisted by Superconducting Fault Current Limiters