Abstract:Abstract A floating raft is a complicated multilayer vibration isolation system, which is often simplified as a two-degree-of-freedom viscous damping system in analysis. In order to research the influences of the hysteretic damping and the raft flexibility on the vibration isolation effect, a three-degree of freedom hysteretic mechanical model of the floating raft is established, and the impedance method is adopted to deduce the model of the force transmissibility of the floating raft. The analytic calculation methods of force transmissibility are given aiming at the low-frequency range, the resonance range, and the high-frequency range, respectively. Finally, the influence rules of damping, mass, and stiffness on force transmissibility are analyzed aiming at the value range of parameters of most floating rafts. The main analysis conclusions are listed as follows: the analytic calculation equation for resonance frequency and resonance peak is accurate; the vibration isolation effect of the high frequency range is determined by the entire floating raft, the unconstrained raft, the inherent frequency of the equipment, the mass ratio between the raft and the equipment only; the hysteretic damping can reduce the force transmissibility at the place of the resonance frequency of the floating raft, which shall be maximized; the increase in the mass of the raft will reduce the force transmissibility during the frequency range above the inherent frequency of the equipment, but it will reduce the marginal benefit; the reduction in the stiffness of the isolator or the raft will reduce the force transmissibility during the frequency range above the inherent frequency of the equipment, and will increase the displacement of the equipment; with limited displacement, it is better to design the isolator and the raft according to the principle of equal stiffness.

Signal Measurement and Analysis for Floating Raft

Research on the method for measuring radiated noise by an underwater target in low frequency band based on the vector hydrophone

Performance of a Raft-Type Wave Energy Converter with Diverse Mooring Configurations

A Depth-Adaptive Waveform Decomposition Method For Airborne Lidar Bathymetry

Measurements of the Low-Frequency Underwater Channel Features in a Littoral Environment Using a Plasma Sound Source

Monitoring the vertical changes of a tidal flat using a MEMS accelerometer array

Experimental Study of Active Absorption Control on Floating Raft System

Design and Research of Floating Ocean Seismograph Observation System

Design and Implementation of a Long-Term Ship-Monitoring System Using Vector Hydrophone

Research on the three degrees of freedom hysteretic mechanical model of floating rafts

A New Feed Forward Fuzzy Control Scheme for Floating Raft Isolation System

The Vibration Isolation Effect Research Of The Floating Raft Isolation System Based On The Adjustable Flexibility Of Foundation

Analytical Study on Hydrodynamic Performance of a Raft-Type Wave Power Device

Fuzzy Vibration Isolation Control for a New Type of Floating Raft

Numerical Study on the Dynamics of a Two-Raft Wave Energy Conversion Device

Raft attitude control and elastic deformation suppression technique for large-scale floating raft air spring mounting system

Vibration Behavior Analysis of Anchor Cables in Submerged Floating Tunnel and Its Application

A Fractional Fourier Transform Approach for Parametric Array Sub-Bottom Profiler Signal Processing

Dual-Use Multistatic Hf Ocean Radar for Current Mapping and Ship Tracking

Dynamic analysis and experimental investigation of particle damping for the vibration reduction and isolation of floating raft using the two-phase flow theory of gas-particle

The vibration isolation and sound radiation reduction characteristic of the micro-floating raft array skin