Abstract:The important role of the distribution cabinets in the power system makes voltage monitoring of them of great significance. However, traditional voltage measurement methods (e.g., electromagnetic voltage transformers) have defects such as galvanic contact and magnetic saturation. Under this background, this article proposes a noncontact (NC) voltage measurement method for three-phase busbar of low-voltage distribution cabinets. Injecting a high-frequency calibrating signal into the capacitive-coupling network of the capacitive-coupled voltage sensor to achieve the self-calibration of the voltage sensor. Additionally, a detailed analysis is conducted on the frequency selection of the calibrating signal. Furthermore, a dc component filtering method based on least squares curve fitting is proposed to achieve accurate voltage measurement. An NC voltage measurement system, dedicated to three-phase busbar in low-voltage distribution cabinets, is designed, and the system includes three-phase capacitively coupled voltage sensor, a measuring circuit, an analog-to-digital converter (ADC), and a microcontroller. A test platform is built to evaluate the system. The test results show that for measuring the three-phase voltage of 220 V/50 Hz, the relative amplitude error of the instantaneous voltage waveform is less than 1%, the phase error is less than 0.5°, and the relative error of the voltage root-mean-square (rms) measurement is less than 0.35%. High linearity is observed with a maximum nonlinearity error of only 0.04%. Frequency response characterization shows the system has an almost constant gain factor and phase errors of less than 1° and 3° at 250 Hz and 1 kHz, respectively. The temperature characteristic of the system is evaluated and the results show as the busbar temperature rises from 28 °C to 42 °C, the rms error increases from 0.07% to 0.4%.

APPARATUS USED TO MEASURE AND MONITOR THE TEMPERATURE OF THE CONTACT OF HIGH-VOLTAGE-SWITCH AND/OR HIGH-VOLTAGE BUS

A Low Temperature Coefficient, High Voltage Detection Circuit Used in Power over Ethernet

New Digital Temperature Real-time Monitoring System for High Voltage Switchgear

Design of passive wireless temperature measurement system for high voltage power equipment

A Real-Time IR-Fusion Switchgear Contact Monitoring System (SCMS).

Wireless monitoring system of temperature for the high voltage switch contact

A Novel Method For On-Line Junction Temperature Measurement Of Power Modules

Design and Realization of Temperature Limiter Measurement and Control System

An Automatic Test System for a Spaceborne Chip of a Temperature-Sensing Controller

Research and experiment the wireless passive surface acoustic wave technology for conductor temperature monitoring of high voltage equipment

Early Warning Of Current-Carrying Faults Based On Deterioration Assessment Of Electric Contacts

Wireless temperature measurement system

The Design of Communication Controlles in the Real Temperature Monitoring System of a Radio Power Switch Cabinet

On-Line Temperature Monitoring System of Electrical Equipment Based on Passive Wireless Sensor

Design of Temperature Data Acquisition and Information Processing System based on Mathematical Method

A Wireless and Passive Online Temperature Monitoring System for GIS Based on Surface-Acoustic-Wave Sensor

An Approach to Monitor Medium Voltage Switchgear Plum Contact Connections Based on Temperature Rise Index

Temperature Compensation Method for Infrared Detection of Live Equipment under the Interferences of Wind Speed and Ambient Temperature

Research on Noncontact Voltage Measurement Method for Three-Phase Busbar of Low-Voltage Distribution Cabinets

The Developing of an Intelligent Condi tion Monitoring Device for High Voltage Swichboard

Touch Current Measurement with Single Human Body Impedance Networks and Thermal Imaging Techniques for Electric Heating Tubes Filled with Electrician Grade Magnesium Oxide Powder