Abstract:We have presented herein the results of microstructure, surface magnetic domains (SMDs), and giant magneto-impedance (GMI) effect of melt-extracted Co68.15Fe4.35Si12.25B11.25Nb2Cu2 amorphous wires for the first time employed by using a cryogenic Joule annealing (CJA) technique with large DC current amplitude. Compared with the conventional JA method, experimental results indicate that the maximum GMI ratio [Delta Z/Z(0)](max) achieves up to 425% at 8.1 MHz with monotonic increase of the axial magnetic field H-ex up to 6.5 Oe for 300 mA (equal to around 1.06 x 10(6) A/dm(-2)) CJA-ed wire, which is about 75% larger than the [Delta Z/Z(0)](max) for the 100 mA (nearly 3.53 x 10(5) A/dm(-2)) JA-ed microwires. The remarkable features of large and linearly sensitive response field (2.5 similar to 6.5 Oe) and the sensitivity of 99.4%/Oe with higher GMI ratio simultaneously make the CJA tailored melt-extracted microwires promising candidate materials for miniaturized GMI sensors. Another interesting result of GMI profiles of 200 mA (appropriately equal to 7.07 x 10(5) A/dm(-2)) CJA-ed wire show a linear response to H-ex (ranging from 10 to 80 Oe or more), this behavior of GMI curves can be explored to fabricate bi-sensor. Large response field proves to originate from the intensive coupling between the radial stress field and the circumferential magnetic field during CJA process. The effect of outer-shell microstructure and complex SMD for 300 mA CJA-ed microwire is attributed to the fact that liquid nitrogen hinders the evolution of circumferential domain structure to some extent and protects the amorphous structure in the shell region. (C) 2014 AIP Publishing LLC.

Study of the Giant Magnetic Impedance Effect in Electro-depositied Complex Wire

Influence of Fe Doping and FeNi-layer Thickness on the Magnetic Properties and GMI Effect of Electrodeposited Ni100−xFex/Cu (x= 0–95) Wires

Optimized GMI Effect in Electrodeposited CoP/Cu Composite Wires

Optimized Giant Magnetoimpedance Effect In Amorphous And Nanocrystalline Materials

Large Enhancement of Gmi Effect in Polymer Composites Containing Co-Based Ferromagnetic Microwires

Valve Behavior Of Giant Magnetoimpedance In Field-Annealed Co70fe5si15nb2.2cu0.8b7 Amorphous Ribbon

Large GMI effect in Co-rich amorphous wire by tensile stress

Combined Current-Modulation Annealing Induced Enhancement Of Giant Magnetoimpedance Effect Of Co-Rich Amorphous Microwires

Giant Magnetoimpedance Effect in a Co-Based Microwire for Quick-Response Magnetic Sensor Applications

Ultra-large Giant Magnetoimpedance Effect by a 2D Square Spiral Amorphous Microwire

Enhanced Gmi Effect in A Co70fe5si15b10 Ribbon Due to Cu and Nb Substitution for B

Giant Magneto-Impedance Effect on Nanocrystalline Microwires with Conductive Layer Deposit

Correlation of Magnetic Domains, Microstructure and Gmi Effect of Joule-Annealed Melt-Extracted Co68.15fe4.35si12.25b13.75nb1cu0.5 Microwires for Double Functional Sensors

Length Effect on Giant Magneto-Impedance in Glass-Covered Co-rich Amorphous Wire

Cryogenic Joule Annealing Induced Large Magnetic Field Response Of Co-Based Microwires For Giant Magneto-Impedance Sensor Applications

Surface microstructural design to improve mechanical and giant magneto-impedance properties of melt-extracted CoFe-based amorphous wires

Wire-Length Effect on Gmi in Co70.3fe3.7b10si13cr3 Amorphous Glass-Coated Microwires

Design and characteristic analysis of giant magnetoimpedance sensor in Fe-based nanocrystalline ribbons

Giant Magnetoimpedance of Glass-Covered Amorphous Microwires of Co-Mn-Si-B and Co-Si-B

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Magnetocaloric Effect and Critical Behavior in Melt-Extracted Gd60Co15Al25microwires