Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. In the present study, the uniaxial tensile flow stress behaviour and work hardening behaviour of AZ31B alloy has been investigated across a wide range of temperature (25 °C–250 °C) at quasi-static strain rates (10−1·s−1–10−3·s−1). The flow stress behaviour of the AZ31B sheet has been analysed at different temperatures, quasi-static strain rates and sheet orientations. It has been found that flow stress behaviour is highly influenced by the variation of temperatures, strain rates, and sheet orientations. The various important mechanical properties such as yield strength, ultimate tensile strength, percentage elongation, strain hardening exponent, and strain rate sensitivity have been determined. There has been a significant improvement in ductility (201.71%) of AZ31B alloy at 250 °C compared to 25 °C. The decrement in yield strength and ultimate strength has been found to be 47.52% and 53.66%, respectively. It has been observed that the AZ31B alloy is found to be more strain rate sensitive at elevated temperature (m = 0.11, at 250 °C) as compare to 25 °C. The various empirical hardening equations such as Hollomon, Ludwik, Ludwigson, Swift, and modified Voce have been formulated for a wide range of temperatures, strain rates, and sheet orientations. The K-M plots show three-stage of work-hardening behaviour for AZ31B alloy. Based on the performance comparison of different models, the Swift and Modified Voce efficiently predict the flow curve with correlation (more than 99%) at different temperature ranges. The fracture surface is analysed by FESEM. The quasi cleavage and river-like pattern are observed for the room temperature fractured specimen. The increase in temperature converts the mode of fracture from cleavage to ductile fracture.

Warm Forging of Magnesium Alloys:the Formability and Flow Stress of AZ31B

Forging of Mg-Al-Zn Magnesium Alloys on Screw Press and Forging Hammer

Flow stress and work hardening behaviour of Mg-3Al-1Zn alloy

Strain Rate and Temperature Effects on Formability and Microstructure of AZ31B Magnesium Alloy Sheet

Comparative study on deformation behavior, microstructure evolution and post-forming property of an Al Zn Mg Cu alloy in a novel warm forming process

Fabrication of Strong and Ductile AZ31 Magnesium Alloy Using High Strain Rate Multiple Forging in a Wide Temperature Range

Characterization of AZ31B, AZ61A and AZ80A magnesium alloys with an emphasis on temperature compensation for their application to a hot forging

Effect of Cold Forging and Static Recrystallization on Microstructure and Mechanical Property of Magnesium Alloy AZ31

Effect of Rotary Forging on Microstructure and Mechanical Properties of Mg–3Al–1Zn Magnesium Alloy

Numerical simulation and experimental study of warm hydro-forming of magnesium alloy sheet

Local Hot Gas Forming of Long Axis Bellow with Non-uniform Temperature

Numerical Modeling of Magnesium Alloy Sheet Metal Forming at Elevated Temperature

Flow characterization of magnesium alloy ZK61 during hot deformation with improved constitutive equations and using activation energy maps

Deformation Behavior of AZ31B Magnesium Alloys with Different Process States under Thermal Compression

Establishment and Application of Flow Stress Models of Mg-Y-Mm-Zr Alloy

Microstructure and Hot Deformation Behaviour of Twin-Roll Cast AZ31 Magnesium Wire

Temperature-Dependent Flow Behavior and Microstructural Evolution During Compression of As-Cast Mg-7.7Al-0.4Zn

Deformation Behavior and Microstructure Evolution of AZ31 Mg Alloy by Forging–Bending Repeated Deformation with Multi-pass Lowered Temperature

Influence of temperature and strain rate on flow stress behavior of twin-roll cast, rolled and heat-treated AZ31 magnesium alloys

Experimental study on temperature-dependent ratchetting-fatigue interaction of extruded AZ31 magnesium alloy

Constitutive Behavior and Microstructure Evolution of the As-Extruded AE21 Magnesium Alloy During Hot Compression Testing