Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. In the present study, the uniaxial tensile flow stress behaviour and work hardening behaviour of AZ31B alloy has been investigated across a wide range of temperature (25 °C–250 °C) at quasi-static strain rates (10−1·s−1–10−3·s−1). The flow stress behaviour of the AZ31B sheet has been analysed at different temperatures, quasi-static strain rates and sheet orientations. It has been found that flow stress behaviour is highly influenced by the variation of temperatures, strain rates, and sheet orientations. The various important mechanical properties such as yield strength, ultimate tensile strength, percentage elongation, strain hardening exponent, and strain rate sensitivity have been determined. There has been a significant improvement in ductility (201.71%) of AZ31B alloy at 250 °C compared to 25 °C. The decrement in yield strength and ultimate strength has been found to be 47.52% and 53.66%, respectively. It has been observed that the AZ31B alloy is found to be more strain rate sensitive at elevated temperature (m = 0.11, at 250 °C) as compare to 25 °C. The various empirical hardening equations such as Hollomon, Ludwik, Ludwigson, Swift, and modified Voce have been formulated for a wide range of temperatures, strain rates, and sheet orientations. The K-M plots show three-stage of work-hardening behaviour for AZ31B alloy. Based on the performance comparison of different models, the Swift and Modified Voce efficiently predict the flow curve with correlation (more than 99%) at different temperature ranges. The fracture surface is analysed by FESEM. The quasi cleavage and river-like pattern are observed for the room temperature fractured specimen. The increase in temperature converts the mode of fracture from cleavage to ductile fracture.

Characterization of AZ31B, AZ61A and AZ80A magnesium alloys with an emphasis on temperature compensation for their application to a hot forging

Accurate Flow Characterization of A6082 for Precision Simulation of a Hot Metal Forming Process

Warm Forging of Magnesium Alloys:the Formability and Flow Stress of AZ31B

Flow Behavior and Processing Map of Mg-4Al-3Ca-1.5Zn-1Nd-0.2Mn Magnesium Alloy

Constitutive Behavior and Microstructure Evolution of the As-Extruded AE21 Magnesium Alloy During Hot Compression Testing

Flow characterization of magnesium alloy ZK61 during hot deformation with improved constitutive equations and using activation energy maps

Temperature-Dependent Flow Behavior and Microstructural Evolution During Compression of As-Cast Mg-7.7Al-0.4Zn

Predicting the Warm Forming Behavior of We43 and Aa5086 Alloys

Flow stress and work hardening behaviour of Mg-3Al-1Zn alloy

Forging of Mg-Al-Zn Magnesium Alloys on Screw Press and Forging Hammer

Grain Refinement and Orientation of AZ31B Magnesium Alloy in Hot Flow Forming under Different Thickness Reductions

Numerical Modeling of Magnesium Alloy Sheet Metal Forming at Elevated Temperature

Hot Workfability Behavior of As-Cast Mg–Zn–Y–Zr Alloy

Development And Validation Of Extrusion Limit Diagram For Az31 And Am30 Magnesium Alloys

Flow Stress Model Development and Hot Extrusion Simulation for Liquidus Casting ZK60 Magnesium Alloy

Flow Stress Behavior of ZK60 and Al18B4O33w/ZK60 During Hot Compression Deformation at Elevated Temperature

A Study on Compressive Anisotropy and Nonassociated Flow Plasticity of the AZ31 Magnesium Alloy in Hot Rolling

Forming Limits of Magnesium Alloy AZ31B Sheet at Elevated Temperatures

Investigation of Properties in Magnesium Alloy Thin Plates after Die Casting Processes

A Comparative Study on Constitutive Modeling of Hot Deformation Flow Curves in AZ91 Magnesium Alloy

Study on Flow Stress Characteristics of AZ31B under Multi-Stage Hot Deformation