Abstract:In recent years, the liquid temporary plugging agent has drawn extensive attention, especially in the repeated fracturing operation for stimulating unconventional oil and gas reservoir production. This paper developed a novel self-degradable gel (SDG) as a liquid temporary plugging agent for high-temperature reservoirs. The gelation process, viscoelasticity, pressure-bearing capacity, self-degradation, and formation protection performance of the SDG were systematically investigated. Moreover, the gelation and self-degradation mechanism of the SDG were revealed by studying the viscosity variation and the microstructures. Considering the gelation time and gel strength, the composition of the SDG was optimized as 6.0–10.0 wt% monomer, 0.004–0.012 wt% initiator, and 0.2–0.4 wt% crosslinker. The SDG transformed from liquid to solid-like gel within 30 to 90 min at 90–130 °C. The rheological results showed that the duration of the low viscosity state exceeded 75 % of the total gelation process at high temperatures, which was conducive to the injection of the SDG. In addition, the viscosity of the SDG after gelation was more than 100 Pa·s, which ensured its effective plugging in fractures. The experimental results with fractured cores showed that the bearing pressure of the SDG remained above 30 MPa/m in fracture with a width of 2.05–5.04 mm, which could meet the requirements of the repeated fracturing operation. Moreover, the SDG could spontaneously degrade from solid-like gel to liquid with a viscosity of lower than 10 mPa·s in 10–105 h at 90–130 °C. The broken-gel liquid could be completely displaced out of the fractured core, and the core damage rate was less than 5.0 %, which ensured the restoration of conductivity of the previously existing fractures. Micrographs showed that the dense three-dimensional network structure with high viscosity was formed by polymerization and crosslinking. Then, the acrylic acids in the polymer chain were broken at high temperatures, resulting in the gradual destruction of the gel and the spontaneous degradation of SDG.

Preparation of Microcapsulated Gel Breaker ZYEB for Water Base Fracturing Fluids

Preparation and performance evaluation of viscoelastic zwitterionic surfactant for cleaning fracturing fluids

Encapsulation Of Potassium Persulfate With Abs Via Coacervation For Delaying The Viscosity Loss Of Fracturing Fluid

A Supramolecular Reinforced Gel Fracturing Fluid with Low Permeability Damage Applied in Deep Reservoir Hydraulic Fracturing

Preparation and characterization of polymer microcapsules containing ammonium persulfate with controlled burst release

Study of Fracturing Fluid on Gel Breaking Performance and Damage to fracture conductivity

Supramolecular polymer-based gel fracturing fluid with a double network applied in ultra-deep hydraulic fracturing

Development and field application of strongly resilient temporary plugging diversion agent for fracturing

Preparation and laboratory study of a sodium carboxymethyl cellulose smart temperature‐controlled crosslinked gel fracturing fluid system

Application of a Zwitterionic Hydrophobic Associating Polymer with High Salt and Heat Tolerance in Brine-Based Fracturing Fluid

Performance Evaluation of Enzyme Breaker for Fracturing Applications under Simulated Reservoir Conditions

Synthesis of ammonium persulfate microcapsule with a polyaniline shell and its controlled burst release

Formulation Development of High Strength Gel System and Evaluation on Profile Control Performance for High Salinity and Low Permeability Fractured Reservoir

Ultra-deep reservoirs gel fracturing fluid with stepwise reinforcement network from supramolecular force to chemical crosslinking

Preparation and Characterization of Temperature-Sensitive Gel Plugging Agent

Activity and Gel Breaking Performance of a Low-temperature-tolerant Complex Enzyme MEMA10

Performance Properties of Viscoelastic Surfactant VES-70 Based Fracturing Fluid: A Laboratory Study

A novel self-degradable gel (SDG) as liquid temporary plugging agent for high-temperature reservoirs

The Evaluation and Application of SmartGel for Deepwater Loss-Circulation Control

Study on Low Damage VES-M Clean Fracturing Fluid for Shallow Oil and Gas Reservoirs in E'nan Area

Synthesis and evaluation of salt tolerant delayed-crosslinking fracturing fluid system in ultra-deep high temperature wells