Abstract:In the last decade, tilted fiber Bragg gratings (TFBGs) have received a lot of research attention due to their unique ability for detection of bending and surrounding refractive index (SRI). Meanwhile, fabrication of TFBGs normally requires fiber pre-hydrogenation and expensive laser systems, such as excimer laser at 193 nm or femtosecond lasers. In this work, we report the first TFBG inscriptions in Boron co-doping fibers (PS1250/1500, FIBERCORE) using low cost 266 nm solid state pulsed laser and scanning phase mask lithography technique. By using this inscription set-up, gratings with tilt angles from 2° to 10° are fabricated. Influences (pulse repetition rate and scanning speed) on the grating quality and spectral performances are discussed. Furthermore, evolution of spectra during the inscription of the 10° TFBG is illustrated showing uniform growths of both the core and cladding modes. In addition to the TFBG fabrication, temperature, bending and SRI measurement are conducted. Because the core mode is restricted to propagate in the fiber core, TFBGs could automatically provide temperature compensation. The ease of TFBG fabrication and the capability of intrinsic temperature self-compensation pave the way to their potentially promising applications in curvature and refractometric measurement.

Holographic Volume Gratings in Bulk Perylene-Orange-doped Hybrid Inorganic-Organic Materials by the Coherent Field of a Femtosecond Laser

Photoinduced Permanent Gratings Inside Bulk Azodye-Doped Polymers By The Coherent Field Of A Femtosecond Laser

Diffraction gratings inside bulk azodye-doped hybrid inorganic–organic materials by a femtosecond laser

The Fabrication of Permanent Holographic Gratings in Bulk Polymer Medium by a Femtosecond Laser

Photoinduced Microstructures Inside Bulk Azodye-Doped Polymers by the Coherent Field of a Femtosecond Laser

Tunable Volume Holographic Filter Based On The Photorefractive Grating

Photofabrication of Periodic Microstructures in Azodye-Doped Polymers by Interference of Laser Beams

Photoinduced Birefringence in Bulk Azodye-Doped Hybrid Inorganic–organic Materials by a Femtosecond Laser

Multiplexing Linear and Nonlinear Bragg Diffractions through Volume Gratings Fabricated by Femtosecond Laser Writing in Lithium Niobate Crystal

Holographic Fabrication of Multiple Layers of Grating Inside Soda–lime Glass with Femtosecond Laser Pulses

Induced Periodic Structures In Bulk Polymers By Interference Of Laser Beams

Two-Photon Polymerization of Gratings by Interference of A Femtosecond Laser Pulse

Fabrication Of Nano-Grating Inside Transparent Materials By Using A Single Femtosecond Laser Beam

Polarisation-free and high-resolution holographic grating recording and optical phase conjugation with azo-dye doped blue-phase liquid crystals

Organic Solid-State Tri-Wavelength Lasing from Holographic Polymer-Dispersed Liquid Crystal and a Distributed Feedback Laser with a Doped Laser Dye and a Semiconducting Polymer Film

Nanoscale liquid crystal polymer Bragg polarization gratings

Femtosecond laser direct-writing of high quality first-order Bragg gratings with arbitrary complex apodization by phase modulation

Femtosecond Laser Inscribed Long-Period Gratings in All-Solid Photonic Bandgap Fibers

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

Photoinduced Alignment and Multi-Processes of Refractive-Index Gratings in Pre-Irradiated Films of an Azobenzene-Containing Liquid-Crystalline Polymer

Long-period gratings in a standard telecom fibre fabricated by high-intensity femtosecond UV and near-UV laser pulses