Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

The Influence of the Rotor Distortion on Self-Correction Usm Function

Analysis and Suppression of Rotor Eccentricity Effects on Fundamental Model Based Sensorless Control of Permanent Magnet Synchronous Machine

Vibration characteristics analysis of a rotor for a permanent magnet motor with Air-Gap Eccentricity

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

A Multifrequency Disturbances Identification and Suppression Method for the Self-Sensing AMB Rotor System

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

A Study on the Friction of a Self-Correction Ultrasonic Stepping Motor

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Unbalance Compensation by Recursive Seeking Unbalance Mass Position in Active Magnetic Bearing-Rotor System

The Precise Modeling and Analysis of Demodulation Approach in Self-sensing Active Magnetic Bearings

Unbalance Compensation for Active Magnetic Bearing Rotor System Using a Variable Step Size Real-Time Iterative Seeking Algorithm.

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

On-line Unbalance Identification of Flexible Rotor System

Correction of Rotor Position Estimation Error for High-Speed Permanent Magnet Synchronous Motor Sensorless Drive System Based on Minimum-Current-Tracking Method

The Realization of Theoretical Sample of USM With High Moment

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

Theoretical And Experimental Analysis On The Influence Of Rotor Non-Mechanical Errors Of The Inductive Transducer In Active Magnetic Bearings

A Disturbance Compensation Control Strategy for Rotational Speed Standard Device Based on AMB System

Correcting Theory of an Ultrasonic Stepping Motor Having Self-correcting Function

Measurements error propagation and its sensitivity analysis in the aero-engine multistage rotor assembling process