Abstract:The microstructural evolution of in-situ TiB2 nano-particle reinforced AlZnMgCu composites during hot extrusion was investigated from micro to macro scales by a combination of various techniques, including neutron and synchrotron X-ray diffraction, optical microscopy, scanning and transmission electron microscopy and electron backscatter diffraction (EBSD). The development of microstructure has shown a bimodal grain structure with distinctive spatial distributions of TiB2 particles: the elongated coarse grain structure with smaller dispersed particles and the fine grains mixed with clusters of relatively larger particles. The particle stimulated nucleation occurs at large particle clusters, resulting in recystallized (sub)micron sized fine grains. The dispersed smaller particles are observed to promote dislocation generation and to prohibit recovery. They are shown to reduce the misorientation of low angle grain boundaries due to the pinning effects on independent dislocations, which also lead to the suppression of dynamic recovery and increase of driving force for dynamic recrystallization. Quantitative texture analysis combined with neutron diffraction and EBSD has exhibited the development of a strong 〈111〉 and 〈001〉 dual fiber texture, and both texture volume fractions are changing with the particle content. In addition, the synchrotron diffraction experiments have shown that dislocation density increases with the particle content in both texture components. The microstructure evolution is the result from a complex process of particles/matrix interaction during the deformation and dynamic recrystallization. In comparison with its particle-free alloy counterpart, the thermomechanical response of the composites at high temperature is discussed in terms of aluminum deformation and recrystallization mechanisms combined with nanosized particle effects.

Microstructure of Ti-Based, Dendrite/Nanostructured-Matrix Composites

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

High-performance Bulk Ti-Cu-Ni-Sn-Ta Nanocomposites Based on a Dendrite-Eutectic Microstructure

Microstructure of Surface and Subsurface Layers of a Ni-Ti Shape Memory Microwire.

Microstructure and Mechanical Properties of As-Cast Ti-N Alloy

Microstructural Characterization of Tib in in Situ Synthesized Titanium Matrix Composites Prepared by Common Casting Technique

In Situ Formed Bulk Nanostructured Ti-Base Composites

Multi-scale Study of Microstructure Evolution in Hot Extruded Nano-Sized TiB2 Particle Reinforced Aluminum Composites

Microstructure and compressive properties of in situ synthesized (TiB + TiC)/Ti composites

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB2/Al-Cu-Mn Composites

Microstructure And Compressive Properties Of In Situ Synthesized (Tib Plus Tic)/Ti Composites

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB<sub>2</sub>/Al-Cu-Mn Composites

Microstructure and Compressive Properties Ofin SituSynthesized TiC/Ti Composites

Nanostructured Ti-based multi-component alloys with potential for biomedical applications.

Growth Morphology and Solidification Behavior of In-Situ Synthesized TiN and TiB

Study on Microstructure of the TiB 2 Reinforced NiAlFe Metal Matrix Composites

Microstructure of Ti3AI Intermetallic Matrix Composites Produced by In-Situ Reaction

Microstructural Characterization of TiC in in Situ Synthesized Titanium Matrix Composites

Ultrafine Composite Microstructure in a Bulk Ti Alloy for High Strength, Strain Hardening and Tensile Ductility

The formation mechanism of eutectic microstructures in NiAl-Cr composites

Microstructure Evolution of As-Cast Nb-Ti-C Alloys