Mass customizing of porcelain

Dan Bin,Li Fei

2003-01-01

American ceramic society bulletin

Abstract:The essential elements of mass customization- a way to fulfill individual requirements of customers with efficiency and cost-effectiveness- include bricks-and-clicks marketing, design by/with customers, networked integrated-manufacturing system, and agile supply chain.

What problem does this paper attempt to address?

Study on Implementation Method of Mass Customization Based on its Extenics Model

Kun-chang CHEN,Zi-chen CHEN

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.06.017

2005-01-01

Abstract:Mass customization (MC) is an important production mode of manufacturing enterprise in the 21st century. Firstly, MC and its extenics model are elucidated. Secondly, application of extenics in the MC implementation is illustrated based on “serialization”, “vari-type structure design” and “vari-technologic design”. Summarily speaking, this paper provides new thoughts and tools for enterprise to find new, efficient implementation method of MC.
Study on Product Bionical Modeling of Mass Customization

Kun-chang CHEN,Zi-chen CHEN

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.07.011

2005-01-01

Abstract:Mass Customization is an important production mode in 21st century, and one of its core technologies is product modeling. At present, there are some studies about mass customization product modeling, but few of them are referred to bionics. Focused on mass customization product modeling, product reuse strategy is analyzed at first; then the modulization theory and its component description are elucidated. Based on the standard component information description through using article characterization, concept, character and partition rule are discussed.
Study on Mass Customization and Its Actualization

LI Min,XU Fuyuan,GU Xinjian

DOI: https://doi.org/10.3321/j.issn:1004-132x.2001.z1.026

2001-01-01

Abstract:Mass Customization is a new kind of product mode that satisfying individual customers' needs while keeping mass production efficiency, such as time to market, low cost and high quality. On the basis of the introduction of the product mode evolution, the paper presented that mass customization is the prevailing product mode of 21 century. And analyzed the connotation of mass customization from the point of target integrated optimization. Then studied on the philosophy of mass customization by dividing it into four levels. The paper discussed the actualization of mass customization on the aspects of advanced technology, advanced management and advanced staff in the end.
Research on Mass Customization in Collaborative Design

朱万贵,葛昌跃,顾新建

DOI: https://doi.org/10.3785/j.issn.1006-754x.2004.02.007

2004-01-01

Journal of Engineering Design

Abstract:Mass customization is becoming the main manufacture mode. Basic methods and theories of mass customization in collaborative design are presented. Base on these theories, collaborative design and net technology are combined. Some profound researches on mass customization in collaborative design have been done. A development model of collaborative design on mass customization based on architecture of J2EE is presented.
Research On Enterprise Management Information System For Mass Customization

Xs Xu,Xj Gu

2005-01-01

Abstract:Mass Customization (MC) is essentially that manufacturers and customers cooperate either to design or to assemble a customized product or service through flexible processes. It is becoming one of the main production models in the 21(st) century. Compared with traditional mass production, mass customization involves in a large amount of information and need a mechanism to manage and control information flow among the collaborative business units. This article, based on mechanical manufacturing, analyzes the information management requirement in mass custornization and presents the design and implementation of an enterprise management information system for mass custornization (MCEMIS). An object-oriented system model is established to support the system integration. A prototype system which consists of three modules is developed to allow customers to interact conveniently with manufacturers and support mass custornization production of manufacturer. It makes enterprise keep a good relationship with customers and escalates the enterprise's product development and management level as well as competition ability.
Mass Customization and Its Knowledge Management

邱进冬,顾新建

DOI: https://doi.org/10.3969/j.issn.1009-0134.2002.12.008

2002-01-01

Abstract:Mass customization is becoming the main production mode in 21th century. Theoptimization of mass customization in a new era of knowledge is probed by adding themarket segment to the production and process optimization, then the important functionof knowledge is pointed out. Finally the knowledge management for mass customizationis discussed.
Mass Customization: the Main Production Mode in Future

顾新建,朱万贵,邱进冬

DOI: https://doi.org/10.3969/j.issn.1006-3269.2002.02.001

2002-01-01

Abstract:The production of MC can provided customers with persoual and customized product quickly and in lower price. As a result, MC is becoming the main production mode. Though the production modes in the different industries were different, the direction of their development is similar. Some modes are from mass production in the past to MC just as car and TV sets industry, some are from customized production in the past to MC just as shipping and steamer machine industry, others are from batch production in the past to MC just as machine tool and aviation industry. The degrees MC adopted are certainly distinct.
Study on Mass Customization Production and Its Application Method

李仁旺,祁国宁,顾新建,吴昭同

DOI: https://doi.org/10.3321/j.issn:1004-132X.2001.04.012

2001-01-01

Abstract:Now,mass customization（MC） has become one of the most important branch of advanced manufacturing technology. In this paper, a theoretical model about MC is established. Then, some original ideas about MC's definition, classification, philosophism are introduced with the conclusions, inspiration and enlightenment. Based on the analysis of MC's application ideology and method system, the authors elucidated the theoretical base of MC. Of course, especially importantissue is that the authors gave out some concrete examples about MC in this paper.
Web2.0 Technology Support for Mass Customization

QI Guo-ning

2009-01-01

Abstract:Mass customization is becoming the mainstream of manufacturing production patterns.The paper shows the characteristics of Web2.0 technologies and the demand for mass customization can fit better,for example,Web2.0 technology can help to increase the capacity of enterprises for obtaining the need of customer in order to provide customers with better personalized service;Web2.0 technology can provides more effectively support for resource sharing among enterprises in order to reduce product cost and shorten the delivery time;Web2.0 technology can support collaborative building standards and improve the coordination capacity of enterprises to promote products modular.
Research and development on collaborative product design tools for mass customization

ZX Yang,XJ Gu,YD Qian,W Sun,XB Liu

2003-01-01

Abstract:The realization of mass customization need synthetically apply modern design method, information technologies, management method and so on. In the paper, we introduce collaborative product design tools for mass customization. which help to implement MC. These tools include the investigation tool for customers' needs, the parts information coding and search tool, the product configuration design tool, the product variant design tool, the knowledge management tool, the standard parts management tool, the collaborative design process management tool, etc..At the same time, main characters of the tools are analyzed.
Study on System Optimization Method for the Actualization of Mass Customization

徐福缘,李敏,顾新建,王恒山

DOI: https://doi.org/10.3969/j.issn.1006-5911.2001.06.010

2001-01-01

Abstract:Mass customization is a kind of product mode which is to organically combine the customization product mode and mass product mode according to the individual customers(needs. The paper proposed a basic thought for the actualization of mass customization, and discussed the thought from the aspects of physical description and mathematical model separately. Therefore, the paper provided a new angle of view for the actualization of mass customization.
Nc Programming System For Mass Customization

Xs Xu,Sl Fang,Sy Wu,Xj Gu

2005-01-01

Abstract:In the new and emerging mass customization (MC) strategy, companies provide customized products or services on the basis of flexible manufacturing and modem information technology (IT). This paper focuses on the rapid design and automatization issue of NC machining program. A NC programming system for mass customization was investigated and employed to construct master NC program of part family and generate NC machining program of variant part rapidly. The purpose is to increase the development efficiency of NC machining program in mass customization company and make the NC machining program meet the variant design of part. In order to expedite the implementation of such a system,the NC programming principle for mass customization was researched. The model of master NC program was presented based on the definition of machining feature and the design of NC subprogram base. In addition,the content and structure of master NC program were analyzed. Then a prototype system was designed and its function model was presented on the basis of CAD system and PDM system. Finally,a case study on bearing cover was carried out to verify the validity of this system.
Application and research on the technologies of the design for mass customization

Han-zhong MAO,Guo-ning QI,Qiao-xiang GU

DOI: https://doi.org/10.3969/j.issn.1001-4551.2007.11.026

2007-01-01

Abstract:Utilising the rotor and cylinder of the steam turbine as examples,the key technologies of design for mass customisation(DFMC) were researched,which are modularisation,product master model,product master structure and configuration design.Out of the research,an applied system of design for mass customisation was assembled.The system consists of several modules,including the system integrated Smart Team PDM,with a coding module and tabular layouts of article characteristics module(both developed by the research team).The system can be used to construct the product master module and product master structure.According to that,it can provide facilities for designing customisation products that satisfy individual customers' needs,and has been applied in the design of the steam turbine.
Study on mass customization and its model

Guoming Qi,Xinjian Gu,Renwang Li

2000-01-01

Abstract:Mass customization (MC) is 21st century-oriented production mode. The problem to be resolved in MC is how to deal with dilemma, i.e. the product must satisfy the individual demands of customer while the cost and delivery time of the customized product are similar to that of the product in mass production. The backgrounds of MC were expounded and MC-oriented integration product-process model was proposed. A kind of mathematical model of MC was established preliminarily.
Research on Mass Customization under E-commerce Environment

Wang Ying,Zhang Peng

DOI: https://doi.org/10.1109/ICEE.2010.820

2010-01-01

Abstract:Mass customization will be as important to business in the twenty- first century as mass production was in the twentieth which has a close relationship with the e-commerce, since e-commerce provides a convenient and fast way for customers to request their personalized product. The aim of this paper is to present the architecture and system model of mass customization based on e-commerce between customer, manufacturer and supply chain. The implementation process of this customer driven mass customization system is described at last.
The probe of mass customization implementation for manufacturing enterprise project management systems

张大岭,邱进冬,顾新建

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.042

2003-01-01

Abstract:Mass customization for the project management systems is put forward in order to satisfy manufacturing enterprise project management dynamically and quickly. Then it is discussed in three aspects of work flow management, component and system integration techniques.
A hybrid configuration design approach for mass customization

M Lu,HB Shi,RF Tong,JX Dong

2005-01-01

Abstract:Mass Customization, whose main goal is to descrease the internal variety of product while increasing external variety as much as possible, is becoming one of the main manufacturing modes in the 21st century. Configuration design is one of the key techniques used in mass customization. In this paper we propose a hybrid approach for product configuration, by combining case-based search with rule-based configuration design. A configuration design system based on this approach is introduced in the end of this paper.
An Integrated Manufacturing System for Mass Customization

Xinsheng Xu,Shuiliang Fang,Xinjian Gu,Xiangbing Xu

DOI: https://doi.org/10.1109/wcica.2006.1714397

2006-01-01

Abstract:In order to increase productivity, integrated manufacturing as a kind of strategy has become more and more important. A conceptual model of integrated manufacturing was proposed. Focusing on the numerical control machining of customized product, the integrated manufacturing principle for mass customization was discussed and architecture model of an integrated manufacturing system was presented as well. Firstly, the master model and master NC (numerical control) program of customized product were built. Then these manufacturing resources were unified managed in the PDM (product data management) system. Based on these resources, variant design of customized product could be carried out, at the same time NC machining program of customized product could be generated rapidly. Secondly, NC machining program was input into the NC machining tool through a DNC (distributed numerical control) system, and then remote machining and control would be realized. By adopting this integrated manufacturing system, company can implement mass customization production effectively
Study on the Product Design for Mass Customization

李敏,徐福缘,顾新建,杨志雄

DOI: https://doi.org/10.3321/j.issn:1004-132x.2002.10.012

2002-01-01

Abstract:The product design for mass customization is the key to successfully implement mass customization in enterprises. The paper introduced four kinds of product design methods for mass customization. Product collocation design is a method which is based on preexisting product configuration and modules. Product variation design is a method which is not only based on preexisting product configuration and modules but also on the diversification of the module size according to the different demands of customers. Product combination design chooses product configuration and modules according to the requirements of customers. And when there are great changes in customer demands, product innovation design is used. The features of the four design methods were compared in the end.
Combining Internal Functional Integration with Product Modularization and Supply Chain Alignment for Achieving Mass Customization

Zhigang Fan,Fei Dai,Mingu Kang,Kihyun Park,Gukseong Lee

DOI: https://doi.org/10.1007/s12063-024-00498-w

2024-01-01

Operations Management Research

Abstract:Mass customization poses one of the primary challenges for manufacturing firms seeking to maintain competitiveness by satisfying diverse and ever-changing demands. The purpose of this study is to present a mechanism illustrating how internal cross-functional integration promotes mass customization by leveraging external supply chain partners and emphasizing the contingent role of product characteristics. Using 223 samples collected from multi-sources of manufacturing firms worldwide, regression and bootstrap analyses are applied to test the proposed moderated mediation research model. Our findings reveal that a firm’s capability of cross-functional integration plays an important role in directly promoting its mass customization performance and indirectly doing so through supply chain alignment. Moreover, our findings underscore that this indirect mechanism is more pronounced when products are designed to be highly modular. Based on our findings, manufacturing firms can enhance mass customization more efficiently and effectively by integrating internal cross-functional collaboration and product modularization, thereby fostering alignment within the external supply chain.

Mass customizing of porcelain

Study on Implementation Method of Mass Customization Based on its Extenics Model

Study on Product Bionical Modeling of Mass Customization

Study on Mass Customization and Its Actualization

Research on Mass Customization in Collaborative Design

Research On Enterprise Management Information System For Mass Customization

Mass Customization and Its Knowledge Management

Mass Customization: the Main Production Mode in Future

Study on Mass Customization Production and Its Application Method

Web2.0 Technology Support for Mass Customization

Research and development on collaborative product design tools for mass customization

Study on System Optimization Method for the Actualization of Mass Customization

Nc Programming System For Mass Customization

Application and research on the technologies of the design for mass customization

Study on mass customization and its model

Research on Mass Customization under E-commerce Environment

The probe of mass customization implementation for manufacturing enterprise project management systems

A hybrid configuration design approach for mass customization

An Integrated Manufacturing System for Mass Customization

Study on the Product Design for Mass Customization

Combining Internal Functional Integration with Product Modularization and Supply Chain Alignment for Achieving Mass Customization