Abstract:This paper presents construction details and test results of a persistent-mode 0.5 T MgB2 magnet developed at the Francis Bitter Magnet Laboratory, MIT. The magnet, of 276 mm inner diameter and 290 mm outer diameter, consisted of a stack of eight solenoidal coils with a total height of 460 mm. Each coil was wound with monofilament MgB2 wire, equipped with a persistent-current switch and terminated with a superconducting joint, forming an individual superconducting loop. Resistive solder joints connected the eight coils in series. The magnet, after being integrated into a testing system, immersed in solid nitrogen, was operated in a temperature range of 10-13 K. A two-stage cryocooler was deployed to cool a radiation shield and the cold mass that included mainly similar to 60 kg of solid nitrogen and the magnet. The solid nitrogen was capable of providing a uniform and stable cryogenic environment to the magnet. The magnet sustained a 0.47 T magnetic field at its center persistently in a range of 10-13 K. The current in each coil was inversely calculated from the measured field profile to determine the performance of each coil in persistent-mode operation. Persistent-current switches were successfully operated in solid nitrogen for ramping the magnet. They were also designed to absorb magnetic energy in a protection mechanism; its effectiveness was evaluated in an induced quench.

Pulsed magnet system with liquid nitrogen cooling for direct measurement of magnetocaloric effect

High Temperature Magnetization Measurement System in Pulsed Magnetic Field

The Design and Measurement of Pulsed Magnetic Field

Design of a 20 T Pulsed Magnet for the Pulsed Field Magnetometer

Experimental and Theoretical Analysis of the Heat Distribution in Pulsed Magnets

Fast Cooling Pulsed Magnet Using Distributed Mini-gaps

A Persistent-Mode 0.5 T Solid-Nitrogen-cooled MgB2 Magnet for MRI.

High Temperature Superconducting Magnet for Fast Discharging Experiments

Development of fast cooling pulsed magnets at the Wuhan National High Magnetic Field Center.

A Persistent-Mode 0.5t Solid-Nitrogen-Cooled Mgb2 Magnet for Mri

AC measurement of heat capacity and magnetocaloric effect for pulsed magnetic fields

The Magnetization Measuring System in Pulsed High Magnetic Field

Cryogenic Test Stand for Characterization of Magnetocaloric Materials

A Cryogen Recondensing Cooling System for Scientific Experiment in the Pulsed High Magnetic Field

A 30 Kj Bi2223 High Temperature Superconducting Magnet for SMES with Solid-Nitrogen Protection

Magnetic and Cryogenic Design of MICE Coupling Solenoid Magnet System

Helium Boil-Off Experiments For A Superconducting Magnet Cryostat With Pulse Tube Cryocooler

Tests on a 6 T Conduction-Cooled Superconducting Magnet

AC Heat capacity and magnetocaloric effect measurements for pulsed magnetic fields

Development and Performance of 65 T Fast-cooling User Magnet with Long Service Life

A single-solenoid pulsed-magnet system for single-crystal scattering studies