Abstract:SiO2 nanoparticle prepared through sol–gel method was directly coated with CeO2 by means of chemical precipitation technique. X-ray diffraction (XRD), differential scanning calorimetry/thermogravimetry (DSC/TG), infrared (IR) spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive analysis of X-ray (EDAX) were used to characterize the CeO2-coated SiO2 nanoparticle. XRD patterns showed that the core region of the composite particles was amorphous SiO2, and the shell region was fluorite-structured CeO2. IR results indicated that the coating of the SiO2 nanoparticle with CeO2 evidently induced the presence of new bands at 960cm−1, due to the vibration of Ce–O–Si. Isoelectric point of the CeO2-coated SiO2 nanoparticle was about 5.6, which displayed a significant shift toward pure CeO2. SEM and TEM micrographs revealed that CeO2-coated SiO2 nanoparticle showed a spherical morphology with the diameter about 300nm and a uniform particle size. Dispersion behaviors of CeO2-coated SiO2 nanoparticle under different conditions were studied in water suspension by investigating its zeta potential and absorbance. The results indicated that zeta potential was higher when pH value was about 10, corresponding to better dispersion stability. The dispersion effect of ultrasonic wave on CeO2-coated SiO2 nanoparticle was markedly superior compared with mechanical stirring. The zeta potential grew up evidently with the increasing of sodium dodecyl benzene sulfonate (SDBS) and poly ethylene glycol (PEG) 4000 concentration. A suspension with CeO2-coated SiO2 at 0.02wt.% was added in 0.05gl−1 anionic surfactant SDBS, and its pH value was adjusted within the range of 10–10.5. In this condition, the stable suspension without sedimentation time was successfully obtained.

Stabilized dispersion of nano-ceramic coating

Stability of Aqueous Nano-Ceramic Coatings with Two Different Dispersants

Effect of Ceramic Powder on the Performance of Coating

CMC as a stabiliser of metal oxide suspensions

Insight into the Dispersive Mechanism of Carboxylated Nanofibrilllated Cellulose for Individual Montmorillonite in Water

Dispersive Ability of Carboxylated Cellulose Nanofibrils for Aqueous Monolayer Montmorillonite Dispersion:Influence of Na+ and Ca2+ Concentrations

Study on Stability of Nanometer Hydroxyapatite Water Suspension

Study on Structure and Mechanical Properties of Celluloid Composites Filled with Titanate Coupling Reagent Modified Nano-Β-sicw

Effects of Dispersant on the Dispersion of Nano-alumina in (Zn-Ni)-Al2O3 Composite Plating

Stabilizing Effect of Methylcellulose on the Dispersion of Multi-Walled Carbon Nanotubes in Cementitious Composites

Effective Dispersion of Aqueous Clay Suspension Using Carboxylated Nanofibrillated Cellulose As Dispersant

THE DISPERSANT EFFECTS ON THE PREPARATION OF HA CERAMIC POWDER

Tailored Design of Well‐defined Comb‐like Copolymer Dispersants for Enhanced Dispersion and Stability of Cerium Oxide Nanoparticle Suspensions

Dispersion characteristics and mechanical properties of epoxy nanocomposites reinforced with carboxymethyl cellulose functionalized nanodiamond, carbon nanotube, and graphene

The Effect of Molecular Weight of Carboxymethyl Cellulose on the Dispersion of Silicon Suspensions Investigated by the Ultrasonic Degradation Method

Surface Modification of Microcrystalline Cellulose: Physicochemical Characterization and Applications in the Stabilization of Pickering Emulsions

Surface Decoration and Dispersibility of Carbon Nanofibers in Aqueous Surfactant Solution

Experimental study on influences of dispersant on dispersion and stability of CMP slurry with silica

Synthesis of CeO2-coated SiO2 Nanoparticle and Dispersion Stability of Its Suspension

Optical and Mechanical Properties of CMCNF-dispersed MMT/CMC-Na Nanocomposite Films:Influence of the Degree of Substitution of CMCNFs

Effect of Dispersant Content on Nanograined Bme Mlcc Powder Prepared by Aqueous Chemical Coating Method