Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

A Study of Dynamic Fracture Toughness Towards Structral Radar Absorbing Laminates

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Experimental study on dynamic behavior of CFRP-to-steel interface

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Dynamic Response and Fracture Mechanism of a Novel Structural Radar Absorbing Material

A new method for measuring the dynamic fracture toughness under blast loads using arc-edge rectangle with edge notches

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Dynamic fracture in CFRP laminates: Effect of projectile mass and dimension

Experimental Investigation of Dynamic Fracture Behaviors of Polymethyl Methacrylate

Dynamic mode-I delamination in composite DCB under impact loads with attunable dynamic effect

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology

An experimental study of the dynamic responses of carbon fiber reinforced polymer composite laminates subjected to ice impact

Experimental Study on Mixed Mode Fracture in Unidirectional Fiber Reinforced Composites

Research on Dynamic Crack Propagation of Toughed Epoxy

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Experimental Data on Fracture of Open-Hole Composite Laminates Subjected to Tension Loading

An investigation on the perforation resistance of laminated CFRP beam and square plate

Dynamic Damage Characteristic of CFRP Target by Ti-6Al-4V Alloy Flake Impact at High Speed

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Experimental Investigation of Interlaminar Fracture Toughness of CFRP Composites with Different Stitching Patterns

Dynamic fracture testing of polymethyl-methacrylate (PMMA) single-edge notched beam