Abstract:The use of Holographic Optical Elements (HOEs) in applications, such as in light shaping and redirection, requires certain characteristics such as a high Diffraction Efficiency, low angular selectivity and stability against UV damage. In order to maximize the performance of the HOEs, photosensitive materials are needed that have been optimised for the characteristics that are of particular importance in that application. At the core of the performance of these devices is the refractive index modulation created during holographic recording. Typically, a higher refractive index modulation will enable greater light Diffraction Efficiency and also operation with thinner devices, which in turn decreases the angular selectivity and the stability of the refractive index modulation introduced during recording, which is key to the longevity of the device. Solar concentrators based on volume HOEs can particularly benefit from thinner devices, because, for a solar concentrator to have a high angular working range, thinner photopolymer layers with a smaller angular selectivity are required. This paper presents an optimisation of an acrylamide-based photopolymer formulation for an improved refractive index modulation and recording speed. This was achieved by studying the effect of the concentration of acrylamide and the influence of different initiators in the photopolymer composition on the diffraction efficiency of holographic gratings. Two initiators of different molecular weights were compared: triethanolamine (TEA) and methyldiethanolamine (MDEA). A fivefold increase in the rate of grating formation was achieved through the modification of the acrylamide concentration alone, and it was also found that holograms recorded with MDEA as the initiator performed the best and recorded up to 25% faster than a TEA-based photopolymer. Finally, tests were carried out on the stability of the protected and unprotected photopolymer layers when subjected to UV light. The properties exhibited by this photopolymer composition make it a promising material for the production of optical elements and suitable for use in applications requiring prolonged exposure to UV light when protected by a thin melinex cover.

Acrylamide-based photopolymer used for holographic recording

Optimization of Acrylamide-based Photopolymer and Its Holographic Character Investigation

A New Photopolymerizable Holographic Recording Material Based on Acrylamide and N-Hydroxymethyl Acrylamide

Study on Holographic Properties of a Water - Resistant Acrylamide - Based Photopolymer

Optimization of a Monomers-Based Photopolymer Used for Holographic Recording

A humidity-resistant highly sensitive holographic photopolymerizable dry film

The Holographic Characteristics of the Photopolymer Based on the Monomer Acrylamide Radicel

Study of the Effect of Methyldiethanolamine Initiator on the Recording Properties of Acrylamide Based Photopolymer

Optimization of two-monomer-based photopolymer used for holographic recording

Study on the Character of Novel Green Light Sensitive High-Density Digital Holographic Photopolymer

High-density holographic recording parameters under different wavelength of a two dyes-sensitized photopolymer

Horseradish Peroxidase Immobilized in Macroporous Hydrogel for Acrylamide Polymerization

Holographic Recording Performance of Acrylate-Based Photopolymer under Different Preparation Conditions for Waveguide Display

Synthesis of DMAW-PMMA Photopolymer with High Photosensitivity for Volume Holographic Storage

A novel photopolymer material for holographic data storage

Using acrylamide-based photopolymers for fabrication of holographic optical elements in solar energy applications

Improvement of holographic recording sensitivities in the green in SiO2 nanoparticle-dispersed methacrylate photopolymers doped with pyrromethene dyes

Study of High-density Holographic Characteristics of a Novel Green-sensitive Photopolymer

Highly sensitive and repeatable recording photopolymer for holographic data storage containing N-Methylpyrrolidone

Study on the Holographic Characters of Two Dyes CO-sensitizedPhotopolymer

Improving performance of two‐stage photopolymers for volume holographic recording by fluorinated epoxy‐amine cross‐linked matrices