Abstract:On the surface of a rotating projectile flying with a supersonic speed, due to the rotational motion, an asymmetric boundary layer transition will occur. This boundary layer distortion caused by the rotation has a significant contribution to the Magnus effect, which will produce a large instability moment and cause flight instability. Therefore, it is of great significance to conduct in-depth research and flow mechanism analysis on the asymmetric boundary layer transition phenomenon on the surface of high-speed rotating projectiles. On the one hand, in supersonic boundary layers, the steamwise flow instability modes are mainly the first mode and the laminar flow separation mode; on the other hand, strong crossflow velocity shear will be generated in the self-rotating state of the projectile and the compressible crossflow instability plays an extremely important role. This paper proposes a physics-informed transition-turbulence model suitable for supersonic/hypersonic boundary layers, which contains physical instability mechanisms and all variables can be solved locally. New time scales for the first mode and crossflow mode are developed. Furthermore, compressibility corrections and cooled wall modifications are performed on the model. Based on this model, we conducted the unsteady simulations of the high-speed rotating straight cone, and carefully compared the mesh sensitivity. In detail, the boundary layer transition characteristics under different Mach numbers, angles of attack, Reynolds numbers and rotational speeds are analyzed through the present transition-turbulence model. Decent agreement with the experiment data verifies that the transition-turbulence model developed by the authors can be applied to predict the asymmetric transition phenomenon on the supersonic flying rotating projectiles with high accuracy.

Influence of propellant crack on turbulence flow in solid rocket motor

Stiffness and dynamical behavior of Jeffcottrotor with cross crack

Numerical Simulation of Sloshing in the Propellant Tank of Reusable Rocket Vehicle Using Meshfree Method

Crack propagation velocity and fracture toughness of hydroxyl-terminated polybutadiene propellants with consideration of a thermo-viscoelastic constitutive model: Experimental and numerical study

Numerical Investigation on the Mechanism of Solid Rocket Motor Instability Induced by Differences between On-Ground and In-Flight Conditions

The Experimental Research into Failure of a Solid Propellant on Micro-Scale

Numerical Simulation of Turbulence Modulation by Cylindrical Particles in Round Jet

Investigation of the Thermal Field on Solid Propellant Grain with Cracks by Moving Particle Semi‐Implicit Method

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

Influence of Crack Nonlinear Breathing Behavior on Critical Speed of Rotor

Numerical study on the flow characteristics of centrifugal compressor impeller with crack damage

Parametric study on the sonic transverse jet in supersonic crossflow and analysis of the jet-crossflow interaction instability

Structural Integrity Assessment of a Solid Propellant Grain Considering Confining Pressure Effect

An improved physics-informed transition-turbulence model for asymmetric transition over supersonic rotating projectiles

Fracture Analysis of Propellant Grain under an Internal Pressure Based on Extended Finite Element Method

Modeling and Analysis of Triggering Pulse to Thermoacoustic Instability in an End-Burning-grain Model Solid Rocket Motor

A Constitutive Model of the Solid Propellants Considering the Interface Strength and Dewetting

Research on flow field characteristics of nozzle plume for a solid rocket motor

Investigation of Carbon–Carbon Nozzle Throat Erosion in a Solid Rocket Motor Under Acceleration Conditions

Strain rate and temperature‐dependent shear fracture mechanism of high‐energy propellant/liner interface zone

Numerical simulation of crack propagation in solid propellant with extrinsic cohesive zone model