Abstract:Abstract The development and progress of multi-sensor data fusion theory and methods have also laid the foundation for the research of human body posture tracking system based on inertial sensing. The main research in this paper is the simulation of gymnastics performance based on MEMS sensors. In the preprocessing to reduce noise interference, this paper mainly uses median filtering to remove signal glitches. This article uses virtual character models for gymnastics performances. The computer receives sensor data from the sink node of the motion capture device through a Bluetooth communication module. The unit calculates the quaternion output from the dynamic link library of sensor data processing, calculates the rotation amount and coordinate offset of each sensor node’s limb, and uses the character model to realize the real-time rendering of the virtual character model. At the same time, it controls the storage of sensor data, the drive of the model, and the display of the graphical interface. When a gesture action is about to occur, a trigger signal is given to the system to mark the beginning of the action, so as to obtain the initial data of each axis signal of the MEMS sensor. When the gesture action is completed, give the system a signal to end the action. Mark the end of the action, so that you can capture the original signal data during the beginning and end of the gesture action. In order to ensure the normal communication between PS and PL, it is necessary to test the key interfaces involved. Because the data received by the SPI acquisition module is irregular, it is impossible to verify whether the data is wrong, so the SPI acquisition module is replaced with a module that automatically increments data, and the IP core is generated, and a test platform is built for testing. The data shows that the average measurement error of X-axis displacement of the space tracking system is 8.17%, the average measurement error of Y-axis displacement is 7.51%, the average measurement error of Z-axis displacement is 9.72%, and the average error of three-dimensional space measurement is 8.7%. The results show that the MEMS sensor can accurately recognize the action with high accuracy.

Micro Measurement System for Tracking Human Body Motion

A Real-Time Articulated Human Motion Tracking Using Tri-Axis Inertial/magnetic Sensors Package.

Body Motion Recognition Based on Acceleration Sensor

1-D Microwave Imaging of Human Cardiac Motion: An Ab-Initio Investigation

Real-Time Human Motion Capture Based on Wearable Inertial Sensor Networks

High Dynamic-Range Motion Imaging Based on Linearized Doppler Radar Sensor

Human Motion Capture Using Wireless Inertial Sensors

Simulation of gymnastics performance based on MEMS sensor

Position and pose measurement technology of space combination ground experiment based on machine vision

A Human Motion Capture System Based on Inertial Sensing and a Complementary Filter

A Flexible Sensor and MIMU-Based Multisensor Wearable System for Human Motion Analysis

Design And Implementation Of The Imu Human Body Motion Tracking System

MMCamera

A High Precision Infrared Light-spot Motion Analysis and Measurement System

Motion Scale: A Body Motion Monitoring System Using Bed-Mounted Wireless Load Cells

A Wearable Human Motion Tracking Device Using Micro Flow Sensor Incorporating a Micro Accelerometer.

Micro Inertial Measurement System

Design of a Wireless Multiple-Mode Human Behavior Evaluation System.

Research on Non-Contact Monitoring System for Human Physiological Signal and Body Movement

Joint motion measurement system based on Euler angle

A wearable motion capture device able to detect dynamic motion of human limbs