Abstract:Recently, the method of Hilbert transform has been used successfully by the authors to identify parameters of linear structures with real eigenvalues and eigenvectors, e.g., structures with proportional damping. Frequently, linear structures may not have proportional damping so that normal modes do not exist. In this case, all the eigenvalues, eigenvectors and modeshapes are complex. In this paper, the Hilbert transform and the method of Empirical Mode Decomposition are used to identify the parameters of structures with nonproportional damping using the impulse response data. Measured impulse response signals are first decomposed into Intrinsic Mode Functions using the method of Empirical Mode Decomposition with intermittency criteria. An Intrinsic Mode Function (IMF) contains only one characteristic time scale (frequency), which may involve the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio, referred to as the modal response. It is shown that all the modal responses can be obtained from IMFs. Then, each modal response is decomposed in the frequency-time domain to yield instantaneous phase angle and amplitude as functions of time using the Hilbert transform. Based on only a single measurement of the impulse response time history at one location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex modeshapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the methodology presented are demonstrated through numerical simulations. It is shown that complete dynamic characteristics of linear structures with nonproportional damping can be identified effectively using the Hilbert transform and the Empirical Mode Decomposition method.

Identifying Dynamic Parameters of A Structure Using Simplex Method

Parameter Inversion Method for Detecting Damage of Structure with Input Completely Unknown

Subspace System Identification Methods for Structural Modal Parameters

Identification of Nonlinear Structural Parameters under Unmeasured Excitation

Simultaneous Identification of Structural Parameters and Support Excitation from Responses on Limited Degrees of Freedom

A two-stage method for identification of structural parameter

Substructure Parameter Estimation For Shear Structures With Limited Measurements And Unknown Structural Mass

Identification of Civil Structures with Nonproportional Damping

Substructure identification for shear structures: Cross-power spectral density method

Modal parameter identification method for structural health monitoring benchmark model

A Two-Step Method for Structural Damage Identification Using Static Residual Force and Modal Strain Energy

Quasi-static testing based structural modal parameter estimation

Simultaneous Identification of Stiffness, Mass, and Damping Using an On-Line Model Updating Approach

Parametric Identification For A Truss Structure Using Axial Strain

Structural Modal Parameter Identification under Ambient Excitation Based on Extreme-point Symmetric Mode Decomposition

On-Line Identification of Physical Parameters at Joint in Time-Varying Structure System Based on Subspace and Substructure Method

Wind Load and Structural Parameters Estimation from Incomplete Measurements

Parameter identification for frame structures considering dynamic soil-structure-interaction

A Dynamic Equilibrium–Based Damage Identification Method Free of Structural Baseline Parameters: Experimental Validation in a Two-Dimensional Plane Structure

Damage identification of non-classically damped shear building by sensitivity analysis of complex modal parameter

Three-Step Method for Stiffness Identification of Inter-Story Shearing Structures under Ambient Excitation