Abstract:Low interfacial adhesion seriously limits the wide application of PBO fiber in composites. To solve this problem, a novel hierarchical reinforcement strategy was developed by introducing epoxy sizing, nanoreinforcement of amino-functionalized silicon dioxide (SiO2–NH2), and an interfacial compatibilizer of 2,6-bis(2-hydroxy-4-aminophenyl) benzobisoxazole (HABO) onto poly(p-phenylene benzobisoxazole) (PBO) fibers via a facile dip-coating approach. SiO2–NH2 and HABO were uniformly dispersed in epoxy sizing, forming an active interface layer. On this basis, wettability, surface roughness of the PBO fiber, and compatibility with the resin matrix were significantly improved, which gave 88.4 and 40.4% enhancement in the interfacial shear strength and interlaminar shear strength of the corresponding composites, respectively. Moreover, it should be noted that the outstanding mechanical and thermal properties of the PBO fiber were not impaired during the sizing treatment. In summary, our work provides an effective and damage-free approach to improve the interfacial adhesion of PBO/epoxy composites.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14975?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14975</a>.ATR-FTIR spectra and TG curves of SiO2–OH and SiO2–NH2; ATR-FTIR spectrum of HABO; TG curves of various PBO fibers; SEM image of PBO-SH0; EDS elemental mappings and cross-sectional SEM images of PBO-SN0, PBO-SN0.5, PBO-SN2, and PBO-SN1-H0.1; three-dimensional (3D) renderings of H-256 and HABO; debonded morphology of PBO-SN0; elemental compositions of SiO2–OH and SiO2–NH2; and percentage contents of different functional groups on pristine PBO and PBO-SN0 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14975/suppl_file/am0c14975_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

EFFECT OF CORONA TREATMENT ON THE SURFACE AND INTERFACIAL ADHESION PROPERTIES OF HIGH PERFORMANCE POLY(P-PHENYLENE BENZOBISOXAZOLE) (PBO) FIBRE

Improvement of the interfacial shear strength of poly(p‐phenylene benzobisoxazole) fiber/epoxy resin composite via a novel surface coating agent

AIR COLD PLASMA MODIFICATION ON PBO FIBER SURFACE

Improvement of Interfacial Adhesion of PBO Fiber

Surface modification of PBO fibers by direct fluorination and corresponding chemical reaction mechanism

Surface modification of PBO fiber through oxygen plasma induced vapor phase grafting of acrylic acid

Influence of Plasma Treatment Time on Plasma Induced Vapor Phase Grafting Modification of PBO Fiber Surface

Effect of Surface Modification on Mechanical and Tribological Performance of Poly-p-phenylenebenzobisoxazole Fiber-Reinforced Polyimide Composite

Interface Properties of Composites from PBO Fibers Modified by Polyurethane Sizing Agent

PBO Super Fiber and Its Surface Treatment

Nondestructive Strategy to Effectively Enhance the Interfacial Adhesion of PBO/Epoxy Composites

Improvement of Interfacial Property Between PBO Fibers and Epoxy Resin by Surface Grafting of Polyhedral Oligomeric Silsesquioxanes (POSS)

Surface Modification of Pbo Fibres by Gamma-Ray Irradiation: Effects on Interfacial Properties of Their Epoxy Composites

Improvement of Interfacial Shear Strengths of Polybenzobisoxazole Fiber/epoxy Resin Composite by N‐tio2 Coating

Influence of MWNTs-COOH on Interface Property of PBO Fiber/Epoxy Composites

Branched Fluorine/Adamantane Interfacial Compatibilizer for PBO Fibers/Cyanate Ester Wave-Transparent Laminated Composites

Interfacial Shear Strength of Nano-Tio2 Coated PBO Fiber Epoxy Composite

Chemical Modification Combined with Corona Treatment of UHMWPE Fibers and Their Adhesion to Vinylester Resin

Photostabilisation of Poly(P-Phenylenebenzobisoxazole) Fibre

A Study of the Influence of Controlled Corona Treatment on Uhmwpe Fibres in Reinforced Vinylester Composites

Plasma Grafting Modification on PBO Fiber Surface