Abstract:The centrifugal impeller with arbitrary surface blades is a very important component in automobile, ships, and aircraft industry, and it is one of the most difficult parts to process. Focusing on the machining efficiency improvement, combining the geometric advantages of ruled surface and arbitrary surface, and utilizing the efficient and accurate advantages of flank machining and point machining, this article presents a novel and targeted tool-path generation method and algorithm for five-axis flank machining of centrifugal impeller with arbitrary surface blades. In light of specific characters of different surfaces, the analyses of two different impeller blades are proposed first, the more characteristic and complex geometrical structures of the arbitrary blade are achieved. In rough machining, an approximate ruled surface blade is obtained, and a simple channel is achieved; the flank milling of the centrifugal impeller with ruled surface blades is achieved relative to the point milling of the centrifugal impeller with arbitrary surface blades; and the triangle tool path planning method is added in this process to save the machining time and cost collectively. Furthermore, in semi-finish machining, the approximate sub-ruled blade surfaces are calculated, and a new flank milling method of the sub-ruled blade surfaces is achieved; a new solution for tool interference is achieved in this process and the generation of noninterference tool paths becomes easy. Machining experiments of two different impellers are presented as a test of the proposed methods.

Tool-Path Planning for 5-Axis Numerical Control Machining of Arbitrary Surface Impeller

Efficient Tool Path Planning for Five-Axis Surface Machining with a Drum-Taper Cutter

Efficient Tool Path Planning for Machining an Impeller with a 5-Axis NC Machine

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

Tool path generation for efficient rough-cut machining of ruled surface impellers

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Cutting Path Planning for Ruled Surface Impellers

Tool-path Planning for Rough Machining of Impeller in 5-Axis Machine Tools

Non-isoparametric Tool-path Planning Based on Plunge Milling

Tool Path Generation for 4-Axis Numerical Control Machining of Arbitrary Surface Blades

Efficient Tool Path Generation for Five-Axis Machining of a Difficult Machined Centrifugal Impeller

An efficient five-axis machining method of centrifugal impeller based on regional milling

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

An Efficient Three-Axis Numerically Controlled Rough-Cutting Machining Approach on Five-Axis Machine for an Integral Centrifugal Impeller

Iso-scallop trajectory generation for the 5-axis machining of an impeller

Tool Path Planning for Five-Axis U-pass Milling of an Impeller

Several-Stage Tool-Path Scheduling in 5-Axis Roughing of Impeller

Optimizing tool-path generation for three-axis machining of a sculptured impeller blade surface

Optimal CNC plunge cutter selection and tool path generation for multi-axis roughing free-form surface impeller channel