Abstract:Existing works in the optimization of five-axis machining mainly focus on the efficiency, precision, or dynamic performance of the machine tools, while the performance of other equipment which assists the machining process has not been considered. This paper takes the robot assisted supporting machining of thin-walled blades as the research objective and proposes an axial-sensitivity-reduction based five-axis toolpath re-scheduling method for facilitating the collaborative support machining with a machine-tool and a robot. The input of the method is lenient, merely including the original toolpath and the workpiece point-cloud model. The output of the method is the re-scheduled toolpath which requires lower motion ability of the assisted support equipment. This is realized by the following approaches. First, an axial sensitivity concept is defined, which quantificationally reflects the influence extent of the machine-tool axis motion on the assisted supporter motion, thus the most sensitive axis which affects the assisted process maximally can be identified. Then, an optimal-partition dual-domain-assisted-fitting method is provided to reconstruct the parameterized geometrical model of blades according to the point-cloud model, thus the multi-value property of the blades which troubles the surface construction is solved. After that, a sensitive-axis-calming bidirectional-tangent-bug-searching method is proposed to re-schedule the toolpath of five-axis machining, thus reducing the sensitivity of the most-sensitive axis. The whole method is universal, because a general cutter model is used and the cutter-contact point keeps invariant after re-scheduling. The correctness and effectiveness of the proposed method are verified by illustration machining tests of a steam turbine blade using an AB-type five-axis machine tool.

Several-Stage Tool-Path Scheduling in 5-Axis Roughing of Impeller

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

An efficient five-axis machining method of centrifugal impeller based on regional milling

Planning and virtual simulation machining of multi-axis rough machining strategy for micro-integral impeller

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Efficient Feedrate Optimization Method for Spline Toolpath Based on Typical Characteristics of Integral Impeller

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

Judging of Machining Feasibility and Calculation of Midsection for the Five-Axis Milling of Shrouded Centrifugal Impeller

Simulation and Optimization of Five-axis NC Machining of Integral Impeller Based on Improved Particle Swarm Optimization

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Key Technologies Research For Impellers Machining Based On Nx

Tool-path planning based on iso-scallop for plunge milling in pocket walls manufacture

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

A Parameter Zone Subdivision Method for Rotary Axes Motion Optimization in Five-Axis Toolpath Generation Using Inverse Evaluation Mechanism

Five-axis toolpath re-scheduling for facilitating assisted supporting thin-walled blade machining by decreasing axis sensitivity

Modeling and machining of integral impeller based on NURBS curve

Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency