Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The efficiency of the compressor's thermodynamic, mechanical, and electric motors can be increased by minimizing their losses. Based on the design characteristics of the compressor, the current study proposes an artificial neural network (ANN) model to forecast the mass flow rate, cooling capacity, compression power, and discharge line loss of the hermetic reciprocating compressor as outputs. This study uses experimental and numerical results obtained by the fluid–structure interaction (FSI) method, and the whole findings are used as inputs for the machine learning method. Using 36 numerical and 3 experimental data sets, a multilayer network is created with input parameters defining mass flow rate, cooling capacity, compression power, and discharge line energy loss. The input parameters for the network model are the compressor's design parameters, which include the compressor speed, discharge valve thickness, and discharge valve length. When comparing the experimental and FSI methods for compressor speeds of 1300, 2100, and 3000 rpm, the FSI study's mass flow rate and cooling capacity parameters converged at 11.9%, 9.1%, and 9.3%, respectively, to their actual values. The convergence rate to experimental compression power data was −0.3%, 2.6%, and 11%. The numerical-experimental deviation for discharge line energy losses is 14.9%, −3.6%, and 7.8%, respectively, for 1300, 2100, and 3000 rpm. With the Levenberg–Marquardt (LM) ANN model, which is used in this study, the average squared error value is calculated as 1.75E-02 and the R2 value is calculated as 0.99976. ANN model can predict outputs with average deviation rates of less than 0.88%. It is seen that results obtained with the ANN method provide high convergence on the experimental and FSI results, while the results obtained with the regression model deviate from the compressor exhaust line results by more than ±20%, and the ANN method is more successful than regression.

Performance Prediction Of Heat Exchangers Based On Model And Artificial Neural Network

Application of an Artificial Neural Network (ANN) for predicting low-GWP refrigerant condensation heat transfer inside herringbone-type Brazed Plate Heat Exchangers (BPHE)

Neural Networks Analysis of Thermal Characteristics on Plate-Fin Heat Exchangers with Limited Experimental Data

Application of an Artificial Neural Network (ANN) for predicting low-GWP refrigerant boiling heat transfer inside Brazed Plate Heat Exchangers (BPHE)

Experimental analysis and ANN prediction on performances of finned oval-tube heat exchanger under different air inlet angles with limited experimental data

Artificial Neural Network and Adaptive Neuro-Fuzzy Interface System Modelling to Predict Thermal Performances of Thermoelectric Generator for Waste Heat Recovery

Comparison of GRNN and RF Algorithms for Predicting Heat Transfer Coefficient in Heat Exchange Channels with Bulges

Predicting Effects of Fin Parameters on Performance of Vehicular Intercooler Based on Neural Network Model

Heat Transfer Coefficient Predictions of the Air-Cooled Condenser with Machine Learning Based on the Operation Big Data of the Power Plant

A novel neural network and sensitivity analysis method for predicting the thermal resistance of heat pipes with nanofluids

Prediction of performance parameters of a hermetic reciprocating compressor applying an artificial neural network

Parameter Optimization of an Absorption Heat Exchanger with Large Temperature Difference

Artificial neural networks for predicting the performance of heat pumps with horizontal ground heat exchangers

Application of Artificial Neural Networks in Predicting the Thermal Performance of Heat Pipes

Modeling of Finned-Tube Evaporator Using Neural Network and Response Surface Methodology

Optimizing heat transfer predictions in HCNG engines: A novel model validation and comparative study via quasi-dimensional combustion modeling and artificial neural networks

Artificial neural network modeling for steam ejector design

Heat exchanger design considering variable overall heat transfer coefficient: An artificial neural network approach

Prediction on the viscosity and thermal conductivity of hfc/hfo refrigerants with artificial neural network models

Predicting Parameters of Heat Transfer in a Shell and Tube Heat Exchanger Using Aluminum Oxide Nanofluid with Artificial Neural Network (ANN) and Self-Organizing Map (SOM)

Using a Generalized Regression Neural Network Prediction Tool to Estimate Thermal Performance in A Heat Exchanger By using Triple Elliptical Leaf Angle Strips with Opposite Orientation and Same Direction