Abstract:The loss of energy by heat is a common problem in almost all areas of industry, and heat pipes are essential to increase efficiency and reduce energy waste. However, in many cases, they have complex theoretical equations with high percentages of error, limiting their development and causing dependence on empirical methods that generate a waste of time and material, resulting in significant expenses and reducing the viability of their use. Thus, Artificial Neural Networks (ANNs) can be an excellent option to facilitate the construction and development of heat pipes without knowledge of the complex theory behind the problem. This investigation uses experimental data from previous studies to evaluate the ability of three different ANNs to predict the thermal performance of heat pipes with different capillary structures, each of them in various configurations of the slope, filling ratio, and heat load. The goal is to investigate results in as many different scenarios as possible to clearly understand the networks' capacity for modeling heat pipes and their operating parameters. We chose two classic ANNs (the most used, Multilayer Perceptron (MLP) network, and the Radial Basis Function (RBF) network) and the Extreme Learning Machine (ELM), which has not yet been applied to heat pipes studies. The ELM is an Unorganized Machine with a fast training process and a simple codification. The ANN results were very close to the experimental ones, showing that ANNs can successfully simulate the thermal performance of heat pipes. Based on the RMSE (error metric being reduced during the training step), the ELM presented the best results (RMSE = 0.384), followed by MLP (RMSE = 0.409), proving their capacity to generalize the problem. These results show the importance of applying different ANNs to evaluate the system deeply. Using ANNs in developing heat pipes is an excellent option for accelerating and improving the project phase, reducing material loss, time, and other resources.

Using a Generalized Regression Neural Network Prediction Tool to Estimate Thermal Performance in A Heat Exchanger By using Triple Elliptical Leaf Angle Strips with Opposite Orientation and Same Direction

Execution of a Smart Prediction Tool to Evaluate Thermal Performance in a heat exchanger by using Single Elliptical Leaf Strips with altered Angle

Comparison of GRNN and RF Algorithms for Predicting Heat Transfer Coefficient in Heat Exchange Channels with Bulges

Heat Flux Prediction of Radiation Balance Wall by Deep Convolutional Neural Networks

Heat exchanger design considering variable overall heat transfer coefficient: An artificial neural network approach

Experimental study and neural network-based prediction of thermal performance of applying baffles and nanofluid in the double-pipe heat exchangers

Assessment of heat transfer characteristics of a corrugated heat exchanger based on various corrugation parameters using artificial neural network approach

Neural Networks Analysis of Thermal Characteristics on Plate-Fin Heat Exchangers with Limited Experimental Data

Application of Artificial Neural Networks in Predicting the Thermal Performance of Heat Pipes

Artificial Neural Network Control of an Experimental Heat Exchanger Facility

Lessen Pressure Drop and Forecasting Thermal Performance in U-Tube Heat Exchanger Using Chimp Optimization and Deep Belief Neural Network

Calculation of the heat power consumption in the heat exchanger using artificial neural network

Combined neural networks and predictive control for heat exchanger networks operation

Design optimization of a shell and tube heat exchanger with staggered baffles using neural network and genetic algorithm

Predicting and optimizing the heat transfer performance of radiator with functionalized graphene nanofluids

Machine learning algorithms for improving the prediction of air injection effect on the thermohydraulic performance of shell and tube heat exchanger

Experimental analysis and ANN prediction on performances of finned oval-tube heat exchanger under different air inlet angles with limited experimental data

Experimental Thermohydraulic Assessment of Novel Curved Ribs for Heat Exchanger Tubes: A Machine Learning Approach

Prediction of heat exchanger efficiency using laminar heat transfer in swirling flow of radiated graphene oxide with nano fluid additives using machine learning technique

Prediction of heat exchanger fouling for predictive maintenance using artificial neural networks

Application of an Artificial Neural Network (ANN) for predicting low-GWP refrigerant boiling heat transfer inside Brazed Plate Heat Exchangers (BPHE)