Abstract:Free vibration of statically thermal postbuckled functionally graded material (FGM) beams with surface-bonded piezoelectric layers subject to both temperature rise and voltage is studied. By accurately considering the axial extension and based on the Euler-Bernoulli beam theory, geometrically nonlinear dynamic governing equations for FGM beams with surface-bonded piezoelectric layers subject to thermo-electromechanical loadings are formulated. It is assumed that the material properties of the middle FGM layer vary continuously as a power law function of the thickness coordinate, and the piezoelectric layers are isotropic and homogenous. By assuming that the amplitude of the beam vibration is small and its response is harmonic, the above mentioned non-linear partial differential equations are reduced to two sets of coupled ordinary differential equations. One is for the postbuckling, and the other is for the linear vibration of the beam superimposed upon the postbuckled configuration. Using a shooting method to solve the two sets of ordinary differential equations with fixed-fixed boundary conditions numerically, the response of postbuckling and free vibration in the vicinity of the postbuckled configuration of the beam with fixed-fixed ends and subject to transversely nonuniform heating and uniform electric field is obtained. Thermo-electric postbuckling equilibrium paths and characteristic curves of the first three natural frequencies versus the temperature, the electricity, and the material gradient parameters are plotted. It is found that the three lowest frequencies of the prebuckled beam decrease with the increase of the temperature, but those of a buckled beam increase monotonically with the temperature rise. The results also show that the tensional force produced in the piezoelectric layers by the voltage can efficiently increase the critical buckling temperature and the natural frequency.

Vibrations of thermal postb-uckled beams with immovable ends

FREE VIBRATION OF HEATED EULER–BERNOULLI BEAMS WITH THERMAL POSTBUCKLING DEFORMATIONS

FREE VIBRATION OF HEATED ELASTIC BEAMS IN THEVICINITY OF THE RMAL POST-BUCKLING CONFIGURATION

Vibration and buckling of a double-beam system under compressive axial loading

Thermal Post-Buckling of an Elastic Beams Subjected to a Transversely Non-Uniform Temperature Rising

The Free Vibration of a Simply Supported Beam on Elastic Foundation under a Thermal Load

THERMAL POST-BUCKLING OF A HEATED ELASTIC ROD WITH PINNED-FIXED ENDS

Analysis of Thermal Post-Buckling of Heated Elastic Rods

Buckling Induced Strongly Nonlinear Vibration of Supercritical Axially Moving Beam

Buckling and Post-Buckling Analysis of Symmetrically Angle-Ply Laminated Composite Beams under Thermal Environments

GEOMETRICALLY NONLINEAR ANALYSIS OF TIMOSHENKO BEAMS UNDER THERMOMECHANICAL LOADINGS

Thermally Induced Vibrations of Flexible Beams Using Absolute Nodal Coordinate Formulation

Thermal postbuckling analysis of anisotropic laminated beams with different boundary conditions resting on two-parameter elastic foundations

Thermal buckling and natural vibration of the beam with an axial stick-slip-stop boundary

Thermal effect on free vibration and buckling of size-dependent microbeams

NON-LINEAR VIBRATION AND THERMAL BUCKLING OF AN ORTHOTROPIC ANNULAR PLATE WITH A CENTRIC RIGID MASS

Free Vibration of Functionally Graded Material Beams with Surface-Bonded Piezoelectric Layers in Thermal Environment

Nonlinear Bending And Thermal Post-Buckling Behavior Of Functionally Graded Piezoelectric Nanosize Beams Using A Refined Model

Free Vibrations of Beams with Arbitrary Boundary Conditions Based on Wave Propagation Method

Thermal Postbuckling Behavior of 3D Braided Beams with Initial Geometric Imperfection under Different Type Temperature Distributions

Thermal Post-Buckling and Vibration Analysis of a Symmetric Sandwich Beam with Clamped and Simply Supported Boundary Conditions