Abstract:Damping treatments have been extensively used as a powerful means to damp out structural resonant vibrations. Usually, damping materials are fully covered on the surface of plates. The drawbacks of this conventional treatment are also obvious due to an added mass and excess material consumption. Therefore, it is not always economical and effective from an optimization design view. In this paper, a topology optimization approach is presented to maximize the modal damping ratio of the plate with constrained layer damping treatment. The governing equation of motion of the plate is derived on the basis of energy approach. A finite element model to describe dynamic performances of the plate is developed and used along with an optimization algorithm in order to determine the optimal topologies of constrained layer damping layout on the plate. The damping of visco-elastic layer is modeled by the complex modulus formula. Considering the vibration and energy dissipation mode of the plate with constrained layer damping treatment, damping material density and volume factor are considered as design variable and constraint respectively. Meantime, the modal damping ratio of the plate is assigned as the objective function in the topology optimization approach. The sensitivity of modal damping ratio to design variable is further derived and Method of Moving Asymptote (MMA) is adopted to search the optimized topologies of constrained layer damping layout on the plate. Numerical examples are used to demonstrate the effectiveness of the proposed topology optimization approach. The results show that vibration energy dissipation of the plates can be enhanced by the optimal constrained layer damping layout. This optimal technology can be further extended to vibration attenuation of sandwich cylindrical shells which constitute the major building block of many critical structures such as cabins of aircrafts, hulls of submarines and bodies of rockets and missiles as an invaluable design tool.

Structural topology optimal design to reduce vibration and noise of thin plate

Structural Topology Optimal Design To Reduce Vibration And Noise Of Thin Plate

Topology optimization for noise reduction of structures with free damping

Stiffeners layout design for noise reduction using topology optimization

Topology Optimization of Constrained Layer Damping on Plates Using Method of Moving Asymptote (MMA) Approach

Radiation Noise Reduction of a Plate-like Structure by Structural Optimization

Optimal Design of Structural Dynamic Boundary Conditions Based on Topology Optimization Method

Topology optimization for acoustic radiation of a constraint damping plate

Optimization Design of Plate on Vibration and Acoustics Based on Finite Element Simulation

Vibro-acoustic Design of Plate Using Bi-Material Microstructural Topology Optimization

Vibration And Acoustic Optimization Of Body In White Based On The Plate Coupling System

STUDY ON REDUCING VIBRATION BY MINIMIZING VIBRATION VELOCITY OF A PLATE

Optimization of Plate with Partial Constrained Layer Damping Treatment for Vibration and Noise Reduction

Minimization of Sound Radiation from Vibrating Bi-Material Structures Using Topology Optimization

Topology Optimization of Plate Structures Subject to Initial Excitations for Minimum Dynamic Performance Index

Optimization Design of Thin-Walled Structure with Constrained Damping Layer

Topology Optimization Of A Constrained Layer Damping Plate Coupled With An Acoustical Cavity

On Topological Design Optimization of Structures Against Vibration and Noise Emission

Optimal Design of Laminated Plate for Minimizing Frequency Response Based on Discrete Material Model and Mode Reduction Method

Acoustic Topology Optimization Of A Plate With Constrained Layer Damping Treatment Coupled With A Cavity

Optimal design of damping material topology configuration to suppress interior noise in vehicle