Abstract:Although there are various methods to measure the modulation transfer function (MTF) of charge-coupled devices (CCD). the interferometric fringe pattern method has advantages over others, such as canted slit sources, bar targets, knife-edge, laser-speckle patterns, random noise pattern, etc. Our interferometric method is relatively simple and versatile: It requires no critical optics and no focusing or precision alignment, the entry array is tested, the contrast ratio of the test pattern is high enough, the spatial frequency of the fringe pattern can vary continuously. Our method generates the formation of a sinusoidal intensity fringe pattern by the interference of two monochromatic plane waves, and straightforward projects it onto the CCD array under test. The construction of the experimental device is based on the Fresnel Double-Mirror structure. A 2.5 mw He-Ne laser with the wavelength of 632.8 nm is used as the light source, the laser beam is spatially filtered by a 10 mu m pinhole and expanded to a diameter of 30 mm, and the resulting wave front is divided by two mirrors, which incline to each other at a small angle, and interfered. One of the mirrors is rotatable to vary the frequency of the pattern. The CCD array is mounted on a stage, which is also rotatable to make that the CCD array takes different angle with the fringe pattern direction, to receive the patterns. With the method we provided, the spatial frequency can be extended to some 2 times the Nyquist frequency of the CCD array to study the aliasing effect. In the Cartesian coordinates, the x- and y- axis MTFs (at angle 0 degrees and 90 degrees) of the CCD array were measured, the other three MTFs (at angle 26.56 degrees, 45 degrees and 63.44 degrees), which nobody has done before, were also tested offering a more comprehensive characterization of the CCD array.

Measurement of Chirp Parameter of Intensity Modulator by Fiber Frequency Response Method

Modulation transfer function measurement of charge-coupled devices using frequency-variable fringe patterns

Bit-Error-Rate Performance Analysis of Self-Heterodyne Detected Radio-Over-Fiber Links Using Phase and Intensity Modulation

Microwave Frequency Measurement Based on Phase Modulation to Intensity Modulation Conversion Using Fiber Bragg Grating

High-Order Electrical Spectrum Method for Measuring the Chirp of a Silicon Mach–Zehnder Modulator

Chirp characteristics of silicon Mach-Zehnder modulators

Instantaneous Microwave Frequency Measurement Using an Optical Phase Modulator

Chirp Characteristics of Silicon Mach–Zehnder Modulator Under Small-Signal Modulation

Study of measurement circuit based on IFM

Photonics-Based Instantaneous Multi-Parameter Measurement of a Linear Frequency Modulation Microwave Signal

Photonic Instantaneous Measurement of Microwave Frequency Using Fiber Bragg Grating

Calibration-free scheme for frequency response measurement of a Mach–Zehnder modulator with low-frequency detection

Photonic Instantaneous Microwave Frequency Measurement Based on Two Different Phase Modulation to Intensity Modulation Conversions

Photonic-Assisted Microwave Frequency Measurement System Based on A Silicon Orr

Concurrent Photonic Measurement of Angle-of-arrival and Chirp Rate of Microwave LFM Signal

Measuring the Frequency Response of Photodiode Using Phase-Modulated Interferometric Detection

Measurement of Polarization Mode Couplings in Polarization-Maintaining Fibers Based on White Light Interference

A Simple Method for Measuring the Rf Half-Wave Voltage of Phase Modulators

The measurement model and method of the OFDM modulator

A Measurement Method of the DTMB Modulator

Photonic Instantaneous Frequency Measurement with Digital Output Based on Dispersion Induced Power Fading Functions