Abstract:Abstract Steam turbines are applied in production plants characterized by very large injections of steam. For this reason, the design and optimization of the admission are fundamentals to obtain an adequate level of turbine efficiency and ensure uniform flow at the inlet of the low pressure stages downstream the injection. In conjunction with a flexible operation and partial load conditions, it is important to estimate the losses appearing at those admissions sufficiently. The aerodynamic performance and flow field of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes were experimentally measured and numerically simulated in this paper. The total pressure loss, outlet flow angle and mass flow rate of the individual tangential admission volute at three different outlet Mach numbers and tangential admission volute coupled with the downstream vanes at four different inlet total pressures were measured. The flow field of the experimental tangential admission volute for the steam turbine was numerically investigated using threedimensional Reynolds-Averaged Navier-Stokes (RANS) and SST turbulence model. The numerical aerodynamic parameters of the tangential admission volute were in good agreement with the experimental data. The accuracy of the presented numerical method was validated. The flow field and aerodynamic parameters of tangential admission volute coupled with the downstream vanes were discussed under different inlet total pressure flow conditions. Then, three volute cases with different transverse distance were designed to investigate the influence of different outlet airflow angles on the aerodynamic performance of the downstream vanes. Results show that the outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes usually keep constants when the inlet total pressure is increases. The averaged outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes equal 152.0° and 166.6°, respectively. Comparing with the individual tangential admission volute, the outlet airflow angle of the tangential admission volute coupled with the downstream vanes is more uniform. The total pressure loss and mass flow rate of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes increase with the inlet total pressure. With the increase of the inlet total pressure, the total pressure loss coefficient of the individual tangential admission volute increases from 0.73% to 1.64%. In the same case, the total pressure loss of the tangential admission volute coupled with the downstream stator vane increases from 0.82% to 2.66%. The average airflow angle of the volute increases with the increase of the transverse distance. With the increase of the transverse distance, the total pressure loss coefficient of the volute increases and the total pressure loss coefficient of the vanes decreases. At the same time, the total pressure loss coefficient of the whole model decreases at first and then increases. The present work provides the reference for the design and performance analysis of the tangential admission volute for the steam turbines.

The Impact of Flow-passage Geometric Parameters on the Aerodynamic Performance of a Low-pressure Guide Vane Assembly

Effects of front guide blade on performance and vortices structure in two turbine low pressure guide vanes

Numerical Investigation of Flow and Loss in a Variable High-Pressure Guide Vane of 1＋1/2 Counter-Rotating Turbine

Comparison of Turbine Low Pressure Guide Vane before and After Optimization

Experimental Study on the Aerodynamic Performance of Variable Geometry Low-Pressure Turbine Adjustable Guide Vanes

Experimental Investigation of Aerodynamic Characteristics of LP Turbine Guide Vane

Aerodynamic Performance Analysis of a Novel Geometry-variable Turbine Guide Vane with a Fixed Angle of Attack

Aerodynamic performance measurement of a novel variable geometry turbine adjustable guide vane scheme by experimental study

Numerical Investigation for Curved Guide Vane in Gas Turbine

Experimental and Numerical Studies on the Influence of Inlet Guide Vanes of Centrifugal Compressor on the Flow Field Characteristics of Inlet Chamber

Numerical simulation and model test of the influence of guide vane angle on the performance of axial flow pump

Analysis of flow field structure and loss of high pressure guide vane

Influence Of Guide Vane Shapes On Hydraulic Characteristics For A Shaft-Extension Tubular Pump Turbine At Turbine Mode

Experimental Measurements and Numerical Investigations on the Aerodynamic Performance and Internal Flow Fields of Tangential Admission Volutes for Steam Turbines

The Impact of Bowed Blades of an Annular Diffuser Cascade on Flow Field Performance

Impact of Slots on the Aerodynamic Performance of the Variable Inlet Guide Vane Cascade of a Centrifugal Compressor

Improved clearance designs to minimize aerodynamic losses in a variable geometry turbine vane cascade

An Efficient Approach For Performance Evaluation And Parameter Design Of Heat Transfer Enhancing Structure

Research on the Turbulent Flow around Guide Vane of Francis Turbine

Experimental Test of a 3D Parameterized Vane Cascade with Non-Axisymmetric Endwall

Numerical deign of guide vanes in elbow bends of a minitype high-speed water-tunnel