Abstract:Ag-Cu-Cl/BaCO3 catalysts with different Cl and Cu loadings, prepared by the reduction deposition impregnation method, were investigated for gas-phase epoxidation of propylene by molecular oxygen and characterized by X-ray diffraction, X-ray photoelectron spectroscopy and O2 temperature programmed desorption. Ag-Cu-Cl/BaCO3 catalyst with 0.036 wt% Cu and 0.060 wt% Cl exhibited the highest catalytic performance for gas-phase epoxidation of propylene by molecular oxygen. A propylene oxide selectivity of 83.7% and propylene conversion of 1.2% were achieved under the reaction conditions of 20% C3H6-10% O2-70% N2, 200 °C, 0.1 MPa and 3000 h−1. Increasing the Cl loading allowed Ag to ensemble easier, whereas changing the Cu loading showed little effect on Ag crystallite size. The appropriate Cl loading of Ag-Cu-Cl/BaCO3 catalyst can reduce the dissociation adsorption of oxygen to atomic oxygen species leading to the combustion of propylene to CO2, which benefits epoxidation of propylene by molecular oxygen. Excessive Cl loading of Ag-Cu-Cl/BaCO3 catalyst decreases propylene conversion and propylene oxide selectivity remarkably because of Cl poisoning. The appropriate Cu loading of Ag-Cu-Cl/BaCO3 catalyst is efficient for the epoxidation of propylene by molecular oxygen, and an excess Cu loading decreases propylene oxide selectivity because the aggregation of Cu species increases the exposed surfaces of Ag nanoparticles, which was shown by slight increases in atomic oxygen species adsorbed. The appropriate loadings of Cu and Cl of Ag-Cu-Cl/BaCO3 catalyst are important to strike the balance between molecular oxygen and atomic oxygen species to create a favorable epoxidation of propylene by molecular oxygen.

Epoxidation of Propylene over Ag-CuCl Catalysts Using Air as the Oxidant

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Epoxidation of Propylene by Molecular Oxygen over Unsupported AgCu X Bimetallic Catalyst

Epoxidation of Propylene by Molecular Oxygen over Supported Ag–Cu Bimetallic Catalysts with Low Ag Loading

Gas-phase Epoxidation of Propylene by Molecular Oxygen over Ag-Cu-Cl/BaCO3 Catalyst: Effects of Cu and Cl Loadings

Gas-Phase Epoxidation of Propylene by Molecular Oxygen over Ag-Cucl2/Baco3 Catalyst with Low Cucl2 Doping: Catalytic Performance, Deactivation and Regeneration

Direct Epoxidation of Propylene on Nacl-Modified Cu/Sio2 Catalysts Using Air As Oxidant

Cu(I)-Catalyzed Epoxidation of Propylene by Molecular Oxygen

Propylene Epoxidation by Dioxygen over Catalyst Copper-Loaded Tio2

Epoxidation of Propylene by Molecular Oxygen over Modified Ag–MoO 3 Catalyst

Epoxidation of Propylene by Molecular Oxygen over the Ag–Y2O3–K2O/α-Al2O3 Catalyst

Epoxidation of Propylene on NaCl-modified Silver Catalysts with Air As the Oxidant

Epoxidation of propylene by air over modified silver catalyst

Propylene oxidation to propylene oxide over Ag/TS-1 catalyst in the gas phase

Copper-Catalyzed Propylene Epoxidation by Molecular Oxygen: Superior Catalytic Performances of Halogen-Free K+-Modified Cuox/Sba-15

A Molecular Insight into Propylene Epoxidation on Cu/SiO2 Catalysts Using O2 As Oxidant

Active Site and Reaction Mechanism for the Epoxidation of Propylene by Oxygen over CuOx/SiO2 Catalysts with and Without Cs + Modification

Propylene epoxidation over Ag/Ts-1 prepared in microemulsion

Supported AgCuCl Nanoclusters as Bimetal Catalysts for Propylene Epoxidation with Molecular Oxygen

Copper-based efficient catalysts for propylene epoxidation by molecular oxygen

Gas Phase Epoxidation Of Propylene Over Amodified Ag/Alpha-Al2o3 Catalyst