Abstract:Electrodeposition of Pt-Pb nanoparticles (PtPbNPs) to multi-walled carbon nanotubes (MWCNTs) resulted in a stable PtPbNP/MWCNT nanocomposite with high electrocatalytic activity to glucose oxidation in either neutral or alkaline medium. More importantly, the nanocomposite electrode with a slight modification exhibited high sensitivity, high selectivity, and low detection limit in amperometric glucose sensing at physiological neutral pH (poised at a negative potential). At +0.30 V in neutral solution, the nanocomposite electrode exhibited linearity up to 11 mM of glucose with a sensitivity of 17.8 microA cm(-2) mM(-1) and a detection limit of 1.8 microM (S/N=3). Electroactive ascorbic acid (0.1 mM), uric acid (0.1 mM) and fructose (0.3 mM) invoked only 23%, 14% and 9%, respectively, of the current response obtained for 3 mM glucose. At -0.15 V in neutral solution, the electrode responded linearly to glucose up to 5 mM with a detection limit of 0.16 mM (S/N=3) and detection sensitivity of approximately 18 microA cm(-2) mM(-1). At this negative potential, ascorbic acid, uric acid, and fructose were not electroactive, therefore, not interfering with glucose sensing. Modification of the nanocomposite electrode with Nafion coating followed by electrodeposition of a second layer of PtPbNPs on the Nafion coated PtPbNP/MWCNT nanocomposite produced a glucose sensor (poised at -0.15 V) with a lower detection limit (7.0 microM at S/N=3) and comparable sensitivity, selectivity and linearity compared to the PtPbNP/MWCNT nanocomposite. The Nafion coating lowered the detection limit by reducing the background noise, while the second layer of PtPbNPs restored the sensitivity to the level before Nafion coating.

A Novel Glucose Biosensor Based on Palladium Nanoparticles and Its Application in Detection of Glucose Level in Urine

Glucose Biosensor Based on a Platinum Electrode Modified with Rhodium Nanoparticles and with Glucose Oxidase Immobilized on Gold Nanoparticles

Application of hydrophobic palladium nanoparticles for the development of electrochemical glucose biosensor

A Nonenzymatic Electrochemical Glucose Sensor Based on Ni(Oh)(2)-Cnt-Pvdf Composite and Its Application in Measuring Serum Glucose

Nonenzymatic amperometric sensing of glucose by using palladium nanoparticles supported on functional carbon nanotubes.

Photodeposition of palladium nanoparticles on a porous gallium nitride electrode for nonenzymatic electrochemical sensing of glucose

A Novel Non-Enzymatic Ecl Sensor for Glucose Using Palladium Nanoparticles Supported on Functional Carbon Nanotubes

A novel non-enzymatic glucose sensor based on a Cu-nanoparticle-modified graphene edge nanoelectrode

A glucose biosensor based on electrodeposition of palladium nanoparticles and glucose oxidase onto Nafion-solubilized carbon nanotube electrode

In situ synthesis of palladium nanoparticle-graphene nanohybrids and their application in nonenzymatic glucose biosensors.

Nonenzymatic Electrochemical Detection Of Glucose Based On Palladium-Single-Walled Carbon Nanotube Hybrid Nanostructures

Study of the Non-enzymatic Glucose Sensor Based on Single-crystalline Porous Palladium Nanoflowers

A Palladium‐Doped Graphitic Carbon Nitride Nanosheet with High Peroxidase‐Like Activity: Preparation, Characterization, and Application in Glucose Detection

Selective and sensitive electrochemical detection of glucose in neutral solution using platinum-lead alloy nanoparticle/carbon nanotube nanocomposites.

A Novel Glucose Biosensor Based on Glucose Oxidase Immobilized on AuPt Nanoparticle – Carbon Nanotube – Ionic Liquid Hybrid Coated Electrode

A Novel Non-Enzymatic Glucose Sensor Based on Cu Nanoparticle Modified Graphene Sheets Electrode

Amperometric Nonenzymatic Sensing of Glucose at Very Low Working Potential by Using a Nanoporous PdAuNi Ternary Alloy

Nanostructured NiCu LDHs/Polypyrrole Nanotubes Composite for Nonenzymatic Glucose Sensing in Human Serum

Synthesis of Palladium/helical Carbon Nanofiber Hybrid Nanostructures and Their Application for Hydrogen Peroxide and Glucose Detection.

Nonenzymatic Glucose Sensor Based on Ultrasonic-Electrodeposition of Bimetallic PtM (M = Ru, Pd and Au) Nanoparticles on Carbon Nanotubes–ionic Liquid Composite Film

Cu–Pd Alloy Nanoparticles on Carbon Paper As a Self-Supporting Electrode for Glucose Sensing