Abstract:The quality of centrifugal pump inlet flow field is an important factor that affecting the performance of pump. Studies have proved that the vortex in the inlet area can also bring an extra flow instability to pump, which results in a hydro-induced vibration. This phenomenon is more common and significant in the pumps with an elbow tube, which is often applied to minimize installation size, before pump inlet. Therefore, it is necessary to look into the influence of inlet flow field instability on pump performance especially the vibration performance. The methods of adjusting pump inlet flow field is also worthy of being studied in the meantime. In this study, the influence of inlet vortex on the performance of centrifugal pump with an elbow inlet tube is investigated by means of CFD analysis. The flow is significantly affected when going through the elbow tube inlet and then turbulence is generated as a result, which enters the impeller at the next moment. The turbulence brings an asymmetrical flow condition at the impeller suction area, which can intensify pressure pulsation and hydro-induced vibration. In order to reduce the turbulence, two modifications on the elbow inlet tube are investigated in this study. A specially designed vane is deployed inside the inlet tube in the MOD1, and the MOD2 is added with two splitter vanes on the basis of the MOD1. The turbulent flow in the elbow inlet tube can be reordered as it is controlled by the vanes. The difference on pump performances that the inlet vane has made is specifically simulated and compared. The flow fields of the inlet tube influenced by the vane is also investigated on the vortex distribution and velocity vector distribution. The MOD1 has a generally smaller pressure fluctuation amplitude than the prototype in the impeller inlet area while the pressure fluctuation amplitude of the MOD2 in the impeller inlet area is stronger than the prototype. It is considered as a consequence of multiple effects, which are, the rise of velocity because of flow area replacement by the vanes making the flow field less stable as well as the wake flow induced by the vanes increasing the instability of the flow field. Therefore, although the flat vanes can help adjusting the flow field, their negative influences also act in the opposite way. It is worthwhile to find the balance between the benefits and the costs in flow field stability of installing adjusting vanes. The selection of parameter, number and installation position needs to be further investigated. The numerical results of the MOD1 are also validated through experimental investigations.

Design Method of the Outlet Width of Centrifugal Pump When Handling Viscous Medium

Analysis of flow characteristics in the volute casing of centrifugal pump based on numerical simulation

Influence of vane curve of solid liquid two-phase flow centrifugal pump on dynamic properties of fluid

Study on the Influence of Centrifugal Pump Inlet Flow Field Instability and Methods of Adjustment

Design Method for Impeller of Centrifugal Pump With Guide Vanes Based on Oseen Vortex

A Performance Test and Internal Flow Field Simulation of a Vortex Pump

Optimization of a Centrifugal Impeller on Blade Thickness Distribution to Reduce Hydro-Induced Vibration

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Impeller design criterion based on numerical simulation of stock pump flow field and its application

Numerical Simulation of Inner Flow Field in Centrifugal Impeller with Long, Middle and Short Blades

Computational Fluid Dynamics-Based Pump Redesign to Improve Efficiency and Decrease Unsteady Radial Forces

High Efficiency and Low Pressure Fluctuation Redesign of A Centrifugal Pump Based on Unsteady Cfd Analyses

A precisive calculation method of volumetric and hydraulic efficiency of centrifugal pumps

Experimental Investigations on the Inner Flow Behavior of Centrifugal Pumps under Inlet Air-Water Two-Phase Conditions

Investigation of flow pattern and hydraulic performance of a centrifugal pump impeller through the PIV method

Optimal design and numerical simulation for impeller of centrifugal pump with medium-high specific speed

Design optimization of the impeller for a high specific-speed pump based on BVF diagnosis

Investigation of CFD Calculation Method of a Centrifugal Pump with Unshrouded Impeller

Numerical Prediction and Performance Experiment in an Engine Cooling Water Pump with Different Blade Outlet Widths

Design of Volute Suction with a Bell-Like Inlet Passage in a Mixed-Flow Pump