Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

ELECTROOSMOSIS ENHANCED INTRAPARTICLE LIQUID FLOW AND MASS TRANSPORT

Electro-osmotic Permeability Model Based on Ions Migration

Protein adsorption-dependent electro-kinetic pore flow: modeling of ion-exchange electrochromatography with an oscillatory transverse electric field.

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

CFD SIMULATION AND EXPERIMENTAL STUDY OF ELECTROOSMOTIC FLOW IN POROUS MEDIA (Ⅱ) CHARACTERISTICS OF ELECTROOSMOTIC FLOW AND MASS TRANSPORT IN POROUS MEDIA

Analysis Of Electro-Osmotic Flow Characteristics At Joint Of Capillaries With Step Change In Zeta-Potential And Dimension

RESEARCH ON DIFFUSION IN MICRO-CHANNEL FLOW DRIVEN BY ELECTROOSMOSIS

Analysis of Electro-Osmotic Flow Characteristics at Joint of Capillaries with Step Change in ζ -Potential and Dimension

Oscillatory Electroosmosis-Enhanced Intra/inter-Particle Liquid Transport and Its Primary Applications in the Preparative Electrochromatography of Proteins.

Numerical Modelling of Electroosmotic Driven Flow in Nanoporous Media by Lattice Boltzmann Method

Electro-osmosis in Inhomogeneously Charged Microporous Media by Pore-Scale Modeling.

Influence of Nernst-Planck diffusion on hollow-fiber mass-transfer processes

Theoretical Study on Potential Distribution and Electroosmotic Flow Velocity in Microscale Channel

Study of Electroosmosis-Driven Two-Liquid Displacement Flow in a Microcapillary

On Applicability Of Poisson-Boltzmann Equation For Micro- And Nanoscale Electroosmotic Flows

Modeling of Electroosmotic Flow and Capillary Electrophoresis with the Joule Heating Effect: the Nernst−Planck Equation Versus the Boltzmann Distribution

Alternating Current Electroosmosis Flow Rate Analysis Based on Electric-triple-layer Model

Deconvolution of electroosmotic flow in hysteresis ion transport through single asymmetric nanopipettes

Non-Negligible Roles of Pore Size Distribution on Electroosmotic Flow in Nanoporous Materials

Electroosmotic Flow Behavior of Viscoelastic LPTT Fluid in a Microchannel.

Development of Mass Transfer Model of Electrochemically Switched Ion Permselective Membrane Separation Process