Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Study of Electroosmosis-Driven Two-Liquid Displacement Flow in a Microcapillary

Theoretical and Experimental Study of Electroosmosis-Driven Two-Fluid Displacement in a Microcapillary

Characterization of Electroosmotic Flow in Microchannels.

Analysis Of Electro-Osmotic Flow Characteristics At Joint Of Capillaries With Step Change In Zeta-Potential And Dimension

Analysis of Electro-Osmotic Flow Characteristics at Joint of Capillaries with Step Change in ζ -Potential and Dimension

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Interface Control of Pressure-Driven Two-Fluid Flow in Microchannels Using Electroosmosis

Theoretical Investigation of Two-Fluid Electroosmotic Flow in Microchannels

Electro-Osmotic Control of the Interface Position of Two-Liquid Flow Through A Microchannel

Analysis of Combined Electroosmotic and Pressure Driven Flow of Multilayer Immiscible Fluids in a Narrow Capillary

Joule Heating Effects on Electroosmotic Entry Flow

Analysis of Electroosmotic Flow in a Microchannel Packed with Microspheres

Effect of magnetic field on electroosmotic flow of viscoelastic fluids in a microchannel

Interface dynamics in electroosmotic flow systems with non-Newtonian fluid frontiers

Electroosmotic flow: From microfluidics to nanofluidics

Numerical Simulation and Experimental Study of the Electroosmotic Flow in Open Microfluidic Chip Based on Super-Wettability Surface

Electroosmosis of viscoelastic fluids in pH-sensitive hydrophobic microchannels: Effect of surface charge-dependent slip length

Numerical calculation of the electroosmotic flow at the cross region in microfluidic chips.

Liquid Metal Droplet-Enabled Electrocapillary Flow in Biased Alternating Electric Fields: a Theoretical Analysis from the Perspective of Induced-Charge Electrokinetics

Dynamic Electroosmotic Flows of Power-Law Fluids in Rectangular Microchannels

A Microscopic Physical Description Of Electrothermal-Induced Flow For Control Of Ion Current Transport In Microfluidics Interfacing Nanofluidics