Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Study on the Axial Velocity of Particles in a Liquid-Solid Circulating Fluidized Bed Using the Ultrasound-Doppler Technique

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

PARTICLE VELOCITY FIELD IN LIQUID-SOLID CIRCULATING FLUIDIZED BEDS

Particle Decelerating Regions in Turbulent Fluidized Bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Investigation of Unstable Solids Circulation Behavior in A Circulating Fluidized Bed with Sweeping Bend Return Using Pressure Frequency Analysis

Phase Holdup and Liquid Dispersion in Gas-Liquid-Solid Circulating Fluidized Beds

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Gas-solid velocity profiles and slip phenomenon in a cocurrent downflow circulating fluidized bed

Liquid dispersion in gas-liquid-solid circulating fluidized beds

Radial solids fraction profiles in inlet region of high density circulating fluidized bed

Experimental Study of High-Density Gas–solids Flow in a New Coupled Circulating Fluidized Bed

Gas Mixing In The Cocurrent Downflow Circulating Fluidized-Bed

Hydrodynamics of a bubble-driven liquid-solid fluidized bed