Abstract:The impact of the boundary plane and impurity contamination on the recombination activity of Sigma3 boundaries in multicrystalline silicon (mc-Si) was studied by means of electron-beam-induced current (EBIC) technique. In the as-grown contamination-free mc-Si, the EBIC contrast of different Sigma3 boundaries was in the order of Sigma3{111}<Sigma3{110}<Sigma3{112}. This order may be attributed to the difference in the defect density of the Sigma3 boundaries due to the effect of the boundary plane. But the maximum EBIC contrast did not exceed 2% at 300 K, suggesting that the Sigma3 boundaries are originally electrically inactive and the boundary plane has no significant effect on their recombination activity. When contaminated with Fe at 900 degreesC, the EBIC contrasts of the Sigma3{110} and Sigma3{112} increased at 300 K, whereas that of the Sigma3{111} was still weak (<3%). This variation in the EBIC contrast may be related to the effect of boron and it is also indicated that the Sigma3{111} has the weakest gettering ability. When contaminated with Fe at 1100 degreesC, the EBIC contrasts of all the Sigma3 boundaries continued to increase and bright-denuded zones developed around the boundaries. The Sigma3 boundaries in the 1100 degreesC air-cooled mc-Si showed stronger EBIC contrasts and broader denuded zones than those in the 1100 degreesC quenched one. This phenomenon was explained in terms of the precipitation of Fe. The precipitation of Fe at grain boundaries (GBs) was affected by both the GB type and cooling rate, that is, Fe is easier to form precipitates onto the Sigma3{110} and Sigma3{112} boundaries during slow cooling. (C) 2005 American Institute of Physics.

Calculation of the Griffith Cohesive Energy of the Ni3AlBx Symmetrical Grain Boundary

The effect of boron on the electronic structure of grain boundaries in Ni3Al

Atomic Investigation of Alloying Cr, Ti, Y Additions in a Grain Boundary of Vanadium

Molecular Dynamics Study of Grain-Boundary-Induced Melting in B2nial Using A Many-Body Potential

First-principles Studies of the ∑5 Tilt Grain Boundary Inni3al

First-principles studies of the ( 5 tilt grain boundary in Ni

Atomic simulation of effects of Ʃ5 grain boundary on mechanical properties of Ni3Al

Ni/Ni3Al Grain Boundary of Ni-based Single Superalloys: Molecular Dyn Amics Simulation

The Effect of Zirconium on the Electronic Structure of Grain Boundaries in Ni3al

Effect of boron on the structural stability, mechanical properties, and electronic structures of γ′-Ni3Al in TLP joints of nickel-based single-crystal alloys

Recombination Activity Of Sigma 3 Boundaries In Boron-Doped Multicrystalline Silicon: Influence Of Iron Contamination

Segregation of alloying elements at the bcc-Fe/B2–NiAl interface and the corresponding effects on the interfacial energy

Concentration-temperature superposition principle for grain boundary migration in Ni(Cu) bicrystals

Effect of double boron impurities on the α-iron grain boundary cohesion

The effect of boron on charge density distribution in Ni3Al

The importance of grain boundaries on the reactive elements effect in β-NiAlHf alloy

First-principles Investigation into the Effect of Cr on the Segregation of Multi-H at the Fe Σ3 (111) Grain Boundary

The Preferred-Site Tendency of Alloying Element Nb in Fe Γ Phase and Its Effect on Grain Boundary Cohesion

On the influence of Al-concentration on the fracture toughness of NiAl: Microcantilever fracture tests and atomistic simulations

MONTE CARLO SIMULATION ON Mg SEGREGATION TO Ni 3al GRAIN BOUNDARY

Atomistic Simulation Study of Grain Boundary Segregation and Grain Boundary Migration in Ni-Cr Alloys