Abstract:Surface topography and chemistry have significant influences on the biological performance of biomedical implants. Our aim is to produce an implant surface with favorable biological properties by dual modification of surface chemistry and topography in one single simple process. In this study, because of its chemical stability, excellent corrosion resistance, and biocompatibility, titanium oxide (TiO2) was chosen to coat the biomedical Ti alloy implants. Biocompatible elements (niobium (Nb) and silicon (Si)) were introduced into TiO2 matrix to change the surface chemical composition and tailor the thermophysical properties, which in turn leads to the generation of topographical features under specific thermal history of plasma spraying. Results demonstrated that introduction of Nb2O5 resulted in the formation of Ti0.95Nb0.95O4 solid solution and led to the generation of nanoplate network structures on the composite coating surface. By contrast, the addition of SiO2 resulted in a hairy nanostructure and coexistence of rutile and quartz phases in the coating. Additionally, the introduction of Nb2O5 enhanced the corrosion resistance of TiO2 coating, whereas SiO2 did not exert much effect on the corrosion behaviors. Compared to the TiO2 coating, TiO2 coating doped with Nb2O5 enhanced primary human osteoblast adhesion and promoted cell proliferation, whereas TiO2 coatings with SiO2 were inferior in their bioactivity, compared to TiO2 coatings. Our results suggest that the incorporation of Nb2O5 can enhance the biological performance of TiO2 coatings by changing the surface chemical composition and nanotopgraphy, suggesting its potential use in modification of biomedical TiO2 coatings in orthopedic applications.

SURFACE MODIFICATION OF BIOMEDICAL NiTi ALLOY BY SOL-GEL-DERIVED TiO2 AND SiO2-TiO2 FILMS

Sol–gel deposited TiO2 film on NiTi surgical alloy for biocompatibility improvement

Characterization of Sol-gel-derived TiO2 and TiO2-SiO2 Films for Biomedical Applications

SURFACE MODIFICATION OF BIOMEDICAL NiTi ALLOY BY ION BEAM SYNTHESIZING TiO2 FILM

Preparation of TiO2-SiO2 Films on Biomedical NiTi Alloy by a Sol-Gel Method

PREPARATION OF TiO2 FILM CONTAINING PHOSPHORUS ON BIOMEDICAL NiTi ALLOY BY SOL-GEL METHOD

Comparison of Structure and Properties of TiO_2 Films Synthesized by Sol-Gel and Ion Beam on Biomedical NiTi Alloy

PREPARATION OF TiO_2 FILM ON METALLIC SUBSTRATES BY SOL-GEL METHOD AND STUDY ON ITS HEMOCOMPATIBILITY

Sol–gel Derived Ag-containing TiO2 Films on Surface Roughened Biomedical NiTi Alloy

Surface Bio-Modification by TiO2 Film on Biomedical Titanium Alloy

Surface Modification with SiO2 Coating on Biomedical TiNi Shape Memory Alloy by Sol–gel Method

Surface modification of NiTi alloy via a TiN coating functionalized with biomimic multilayer films

Characterization of Tio2/Ta(2)O(5) Films Synthesized by Ion Beam on Niti Alloy for Biomedical Applications

Surface modification of TiO2(Ta5+)/TiN film for biomaterials using doping and duplex technology

Progress on Surface Modification of Biomedical NiTi Alloy

Enhanced Corrosion Resistance and Cellular Behavior of Ultrafine-Grained Biomedical NiTi Alloy with a Novel SrO–SiO2–TiO2 Sol–gel Coating

Tailoring the Surface of NiTi Alloy by TiN Coating for Biomedical Application

In Vitro and in Vivo Evaluation of Porous NiTi Alloy Modified by Sputtering a Surface TiO2 Film

Preparation, characterization, corrosion behavior and bioactivity of Ni 2 O 3 -doped TiO 2 nanotubes on NiTi alloy

Preparation Of Tio2 Coated Biomedical Porous Niti Alloys By Sol-Gel Method

Delicate Refinement of Surface Nanotopography by Adjusting TiO2 Coating Chemical Composition for Enhanced Interfacial Biocompatibility.