Abstract:Dispersion nuclear fuel elements have promising prospects to be used in advanced nuclear reactors and disposal of nuclear wastes. They consist of fuel meat and cladding, and the fuel meat is a kind of composite fuel in which the fuel particles are embedded in the non-fissile matrix. Prediction of the micro-thermo-mechanical behaviors in dispersion nuclear plates is of importance to their irradiation safety and optimal design. In this study, the heterogeneity of the fuel particles along the thickness direction in the fuel meat is considered. The 3D finite element models have been developed respectively for two cases: (1) variation of fuel particle-particle (PP) distances for the particles near the mid-plane of the fuel meat; (2) variation of the particle-cladding (PC) distances for the fuel particles near the interface between the fuel meat and the cladding. The respective finite strain constitutive relations are developed for the fuel particle, metal matrix and cladding. The developed virtual temperature method is used to simulate irradiation swelling of the fuel particles and irradiation growth of the metal cladding. Effects of the heterogeneous distributions of the fuel particles on the micro temperature fields and the micro stress-strain fields are investigated. The obtained results indicate that: (1) as a whole, the maximum Mises stress, equivalent plastic strain and first principal stress at the matrix between the two closest particles increase with decreasing the particle-particle (PP) distance; existence of large first principal stresses there may be the main factor that induces the matrix failure; (2) variation of the particle-cladding (PC) distance has remarkable effects on the interfacial normal stress and shear stress at the interface between the fuel meat and the cladding; the first principal stress at the cladding near the interface increases dramatically when the fuel particle is closer and closer to the cladding. Thus, the proper distance between the fuel particles and the one between the fuel particle and the cladding should be considered in the optimal design; (3) the micro temperature distribution in the fuel element is hardly affected. (C) 2011 Elsevier B.V. All rights reserved.

Fracture Mechanisms of Sandwiched Dispersion Fuels

Experiments, characterizations and analysis of a U3Si2–Al dispersion fuel plate with sandwich structure

Mechanical Characterizations of the Dispersion U 3 Si 2 -Al Fuel Plate with Sandwich Structure

Effect of the Fabrication Process on Fatigue Performance of U3Si2 Fuel Plate with Sandwich Structure

Tensile Failure Analysis of U3Si2-Al Fuel Plate

Analysis of the Failure Mechanisms of U3Si2-Al Dispersion Fuel Plate Using the Digital Speckle Correlation Method

Direct Observation of Fatigue Cracking in the Fuel Plate Using the Scanning Electron Microscope

Effects of Process Techniques Used in Preparation of U3Si2-Al Dispersed Fuel Plates on Mechanical Properties

Finite Element Analysis of Swelling Behaviors in Dispersion Fuel Plates

Effects of Particle Volume Fraction on the Macro-Thermo-Mechanical Behaviors in Plate-Type Dispersion Nuclear Fuel Elements

The critical influencing factors responsible for the particle cracking in UMo/Zr dispersion fuel plates during post-irradiation anneal tests

Effects of Porous Fuel Structure on the Irradiation-Induced Thermo-Mechanical Coupling Behavior in Monolithic Fuel Plates

Probability Analysis of the Fuel Microsphere Distribution of Dispersion-Type Nuclear Fuel Plates

Multi-physics Field Coupling Optimization Study for U3Si2-Al 3 Si 2-Al Arc-Type Fuel Plate Performance Analysis

Partial Engineering Validate Test Investigation of New U_3Si_2-Al Fuel Subassembly

Effects of heterogeneous distribution of fuel particles on the irradiation-induced mechanical behaviors in the dispersion nuclear fuel plate

Effects of Fission Heat and Fuel Swelling on the Thermal-mechanical Behaviors of Dispersion Fuel Elements

Modeling of Irradiation-Induced Damage and Failure Behaviors of Fuel Foil/cladding Interface in UMo/Zr Monolithic Fuel Plates

Finite Element Modeling of Thermal-Mechanical Behaviors of Dispersion Fuel Elements

Prediction of the Micro-Thermo-mechanical Behaviors in Dispersion Nuclear Fuel Plates with Heterogeneous Particle Distributions

Research on In-Pile Thermal-Mechanical Behavior of UMo/Zr Monolithic Fuel Plates