Finite element based fuel performance investigation of U3Si2-FeCrAl design under normal and RIA conditions
Chaoqun Deng,Yanan He,Fengrui Xiang,Yingwei Wu,Jing Zhang,Wenxi Tian,Guanghui Su,Suizheng Qiu
DOI: https://doi.org/10.1016/j.pnucene.2022.104265
IF: 2.461
2022-01-01
Progress in Nuclear Energy
Abstract:U3Si2-FeCrAl system has been a promising Accident Tolerant Fuels (ATFs) candidate for its higher thermal conductivity, higher uranium density and lower oxidation rate. As a part of wide efforts to analyze the thermomechanical behaviors of the proposed ATFs, a finite element-based fuel performance code called BEEs, developed based on MOOSE (Multiphysics Object-Oriented Simulation Environment) framework, has been extended to analyze the behaviors of U3Si2-FeCrAl under reactivity insertion accidents (RIA). In this work, CABRI-REP tests were simulated to validate the modeling capacity of BEEs for RIA firstly. Then, with the fuel behavior models applicable to U3Si2 and FeCrAl implemented in BEEs, the thermo-mechanical response of U3Si2-FeCrAl to postulated RIA conditions were evaluated and compared with UO2-Zircaloy, UO2-FeCrAl and U3Si2-Zircaloy systems. The results show that U3Si2-FeCrAl system can reduce the fuel temperature (about 400-600 K) and delay gap closure during normal operation. The performance of cladding in U3Si2-FeCrAl system is comparable with UO2-Zircaloy and UO2-FeCrAl systems. However, the fuel central temperature of U3Si2-FeCrAl system is found to increase (about 110-180 K when RIA occurs at zero burnup, and about 170-190 K when RIA occurs after normal operation) compared to systems with UO2 fuel due to the lower volumetric heat capacity of U3Si2, which can lead to a threat to fuel security in RIA conditions, especially taking the lower melting point of U3Si2 (U3Si2 is -1938 K and UO2 is -3138 K) into account.