Abstract:Summary form only given. Because of higher hold-off voltage and higher current than power semiconductor such as GTO, MOSFET, PCSS, SOS etc., spark gap switches are generally used in the last output stage of high power modulator. But its recovery time is millisecond level, so it is prevented on the high rep-rate conditions. The gaseous recovery in a spark gap was investigated by using Two-pulses method with which the tested spark gap was broken down twice by two identical voltage pulses with a preset time interval in between. While the first breakdown is overvolted breakdown, the second breakdown happens usually at a voltage much lower than the first one. By comparing the two breakdown voltages the gaseous recovery as a function of the time interval between the two voltage pulses was obtained. There are two plateaus on the curve of the breakdown voltage recovery. The first plateau appears at the voltage of about the DC static breakdown and the second one appears when the gas is almost fully recovered. It was found that the shorter gaps at all nitrogen pressure tend to recover faster and the gaps with higher pressure also tend to recover faster. If more energy is deposited in the spark channel produced by the first breakdown, the gas insulation recovers slower. Both the first breakdown voltage and the second one obey Gaussian distribution. If the second breakdown happens at the point before the end of the first plateau on the curve of the breakdown voltage recovery, its mean square deviation of the breakdown voltage distribution will be smaller than that of the first breakdown. By taking photographs of the discharge in the spark gap, it was important to find that the spark channel produced by the second breakdown usually does not follow that by the first breakdown. The second spark channel is located with a distance of 0~3 mm from the first one. The longer is the time interval between the two voltage pulses, the larger is the distance.

Sparkover of Rod-Plane Gap for Composite Alternating or Direct/impulse Voltages

Air Breakdown in Conductor-Rod Gap with Direct or Alternating Voltage Switching Impulses

Corona Charge Injection Prior to Sparkover in an Inversed Rod-Plane Gap under Composite Voltages

Sparkover behavior of insulator under composite switching impulse/alternating or direct voltage

Breakdown Characteristics of Rod-Plate Electrode under Composite AC and DC Voltage

Air Breakdown Behavior of Two Series Gaps for Composite Switching Impulse/alternating Voltage

Impact of overvoltage on the mode transition of the spark gap switch: from edge breakdown to stochastic breakdown

Research on transition condition between streamer and leader in 1 m plane-rod gap under switching impulse voltage

Breakdown voltage characteristics of combined air gaps under negative lightning impulse

Study On Ac Breakdown Characteristics Of Rod-Rod Air Gaps With The Interference Of Floating Conductors

Spark Conditioning of Vacuum Interrupters with Very Low Breakdown Energy

Switching Impulse Breakdown Characteristics of Large Sphere-Plane Air Gaps Compared with Rod-Plane Air Gap

Effect Of Humidity On Corona Characteristics Under Rod-Plane Gap

Overvolted breakdown and recovery characteristic of spark gap switch

Multiple discharges before leader inception in long air gaps under positive switching impulses

Influence of Rain on AC Discharge Characteristic of Rod-Plane（rod-rod） Air Gap

Study on Spark Conditioning of Vacuum Switch with a Parallel Capacitor

Effect of Different DC Prestressed Time on Flashover Characteristics of Epoxy Resin under Polarity Reversal Voltage

Effect of Gas Type on Insulation Recovery Performance and Repetitive Breakdown Stability of a Corona-Stabilized Plasma Closing Switch

Effects of Corona Discharge in Gas Switch

Negative DC Discharge Characteristics of Rod-rod Gap and Insulator Under Foggy Conditions