Abstract:With the utilization of photomasks, micro/nanoscale wells and channels with depths ranging from nanometers to several micrometers were fabricated on a poly(ethylene terephthalate) (PET) surface by a simple combination of photochemical and alkaline hydrolysis etching. The PET surface region could be directly and photochemically etched by UV light and N,N-dimethylformamide (DMF) to create 125-350 nm etching depths (step 1). In step 2, the depth could be further enlarged to 250-1400 nm by potassium hydroxide (KOH) developing. More importantly, when this combination etching was repeated with the same photomask, the depth increased with increasing etching times. For instance, the depth reached approximately 6 mu m after a series of three combination etchings. The cross-sectional shape of the final structure was trapezoidal with smooth corners. No obvious widening effect in lateral size was observed after one combination etching, whereas the top width of the microfabricated channels was enlarged from 50 mu m (the designed feature of the photomask used) to 100 mu m after two or three combination etchings. Even more interesting was that step 1 resulted in the formation of a kind of aminated surface in the channel (6.5% amine content), but when step 2 was conducted, the aminated surface was erased. This process could be reversibly carried out by repeating step 1 (amination) and step 2 (erasing). Electrostatical self-assembly of an antibody, fluorescein isothiocyanate-labeled immunoglobulin G (FITC-IgG, goat anti-rabbit), was achieved on the aminated surface of the etched channels, which demonstrated that by this combination strategy, micro/nanoscale channels or wells featuring tunable depths and functional channel surfaces could be readily fabricated. Undoubtedly, these functionalized channels or wells onto organic substrates could provide a potential platform for microchips toward various functions such as microarrays, heterogeneous immunoassays, biosensors, concentrations, filtrations, and microanalysis.

Pepsin Nanofilm Self-Assembly on the Positively Charged Poly (ethylene Terephthalate) Substrate

Pepsin nanofilm self-assembly on the positively charged poly (ethyoene terephthalate)sudstrate

Study on Lipase Self-Assembly Functional Films on the Positively Charged Poly(Ethylene Terephthalate)

The Lipase Monolayer Film Self-Assembly on the Negatively Charged Poly(Ethylene Terephthalate) Substrate

Self-assembly of Perylenediimide and Naphthalenediimide Nanostructures on Glass Substrates Through Deposition from the Gas Phase.

Fabrication and Characterization of Ag/polymer Nanocomposite Films Through Layer-by-layer Self-Assembly Technique

A Positively Charged Nanofiltration Membrane Prepared by Dynamic Self-Assembly of PSS, PSS-co-MA and PAH

Investigation of α-amylase self-assembled films on the negatively charged PET surface by AFM

Investigation of alpha-amylase self-assembled films on the negatively charged PET surface by AFM

Modification of Amorphous Poly(ethylene Terephthalate) Surface by UV Light and Plasma for Fabrication of an Electrophoresis Chip with an Integrated Gold Microelectrode

Facile Preparation of a Patterned, Aminated Polymer Surface by UV-Light-Induced Surface Aminolysis

Surface modification of poly(ethylene terephthalate) via hydrolysis and layer-by-layer assembly of chitosan and chondroitin sulfate to construct cytocompatible layer for human endothelial cells.

Enzyme biocatalyst route to superhydrophobic surfaces on microstructured poly(ethylene terephthalate) film

Nano-immobilization of PETase enzyme for enhanced polyethylene terephthalate biodegradation

Silver Nanoparticle Catalyst for Electroless Ni Deposition and the Promotion of Its Adsorption Onto PET Substrate

Structural insight into catalytic mechanism of PET hydrolase

Nanoporous nonwoven fibril-like morphology by cooperative self-assembly of poly(ethylene oxide)-block-poly(ethyl acrylate)-block-polystyrene and phenolic resin

Tunable Assembly of Nanoparticles on Patterned Porous Film.

Micro/nanoscale well and channel fabrication on organic polymer substrates via a combination of photochemical and alkaline hydrolysis etchings.

Generation of Active Amino Groups on the Surface of a Polyethylene Terephthalate Film and Their Quantitative Evaluation

One-step fabrication of self-assembled peptide thin films with highly dispersed noble metal nanoparticles.