Abstract:In the field-weakening region, the traditional field-weakening method for induction motor drives based on model predictive control (MPC) is to take a no-load operation as the premise and adjust the flux reference in the cost function proportional to the inverse of the rotor speed, which leads to poor torque output. This paper presents a novel field-weakening method for IM drives based on MPC. Considering the induction motor field-weakening limiting conditions and according to the speed adaptive field-weakening strategy with a voltage closed-loop, the speed adaptive field-weakening controllers were designed to optimize the references of the excitation current and torque current. In the rotor field-orientation d–q coordinate system, the stator flux amplitude and torque reference values were optimized by the optimal distribution current. Then, according to the dead-beat control principle, they were converted into an equivalent stator flux vector reference. Moreover, the stator voltage vector reference can be obtained. For an induction motor fed by a three-level neutral point clamped (3L-NPC) inverter, the cost function was constructed by combining all the constraints, including the voltage vector, the neutral potential balance, and the switching frequency. In this way, the high-performance field-weakening operation for the induction motor based on a model predictive control can be realized. The simulation and experiment results show that the proposed method can increase the torque output by 22% in the field-weakening region; at the same time, the steady characteristics and the dynamic response performance can be maintained well.

High Performance Drive System for Induction Motors Based on a Nonlinear Model

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Comparative Study of Flux-Weakening Control Methods for Pmsm Drive over Wide Speed Range

Modeling and Simulation of Non-Linear Dynamic Process of the Induction Motor System with Fluctuating Potential Loads

A Control Strategy for the Optimal Efficiency of Induction Motor Based on Loss Model and Fuzzy Search

Torque Optimization Analysis with Magnetic Saturation Models for Induction Machines

An Error Tracking Dead-beat Model Predictive Torque Control for Open-Winding Permanent Magnet Synchronous Motor with Common DC Bus

Enhanced Efficiency in Permanent Magnet Synchronous Motor Drive Systems with MEPA Control Based on an Improved Iron Loss Model

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

High Dynamic Response Control of Induction Motor in High-Speed Region for Electric Vehicle Drive System

High performance vector control of IPMSM drive fed by indirect matrix converter

Design of Complex Vector Controller for High-power Induction Machine Drive

Torque Increase Strategy for Induction Motor in the Field-Weakening Region Based on Model Predictive Control

Non-linear Modeling and Simulation of Induction Motor

Induction Machine Flux Weakening Control Strategy Based on the Load Torque

Modeling and control for an integrated permanent magnet toroidal motor drive with nonlinear electromagnetic parameters

Mathematical model and nonlinear control strategy of induction motor

Novel deadbeat direct torque and flux control for interior permanent magnet synchronous motor

High Performance Control of Matrix Converter Fed Induction Motor Drive System

A High-Performance Synchronous Motor Field-Oriented Control System