Enhanced Efficiency in Permanent Magnet Synchronous Motor Drive Systems with MEPA Control Based on an Improved Iron Loss Model

Fang Xu,Handong Ren,Hongwu Zhan

DOI: https://doi.org/10.3390/electronics13050858

IF: 2.9

2024-02-23

Electronics

Abstract:This paper investigates the efficiency optimization problem in the drive system of Permanent Magnet Synchronous Motors (PMSM) based on the iron loss resistance model. Initially, an efficiency calculation method is proposed, utilizing the direct current (DC) side power based on the iron loss motor model as the input power. This approach determines the system's input power by measuring DC side voltage and current, accounting for the impacts of temperature, magnetic saturation, and inverter nonlinearity. It avoids the need for intricate nonlinear loss modeling of the inverter, thereby simplifying the computational requirements for system efficiency. Simultaneously, the d-q axis equivalent equations based on the iron loss motor model are employed to calculate the system's output power, enhancing the accuracy of the system efficiency calculation. An improved discrete gradient descent algorithm is presented based on this system efficiency calculation model, accelerating the search for the optimal current angle and improving its accuracy. In comparison to existing methods, this approach exhibits adaptive step size and provides more precise and higher efficiency calculations, resulting in faster search speeds. Experimental and simulation evaluations are conducted to assess the effectiveness of the proposed methods.

engineering, electrical & electronic,computer science, information systems,physics, applied

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the problem of improving efficiency in the permanent magnet synchronous motor (PMSM) drive system. Specifically, the paper focuses on the MEPA (Maximum Efficiency Per Ampere) control strategy based on the improved iron - loss model (ILMM), aiming to optimize the efficiency of the drive system. Traditional methods usually only consider the copper loss and iron loss of the motor, while ignoring the losses of the inverter, which leads to inaccurate efficiency calculations. In addition, existing optimization algorithms have problems of slow convergence speed and insufficient accuracy when searching for the optimal current angle.

To overcome these problems, the paper proposes the following innovations:

1. **System efficiency calculation model**: A system efficiency calculation method based on the improved iron - loss model is proposed. This method determines the input power of the system by measuring the DC - side voltage and current, and combines the effects of temperature, magnetic saturation and inverter nonlinearity, avoiding complex inverter nonlinear loss modeling and simplifying the calculation requirements of system efficiency.

2. **Output power calculation**: The d - q - axis equivalent equations based on the iron - loss motor model are used to calculate the output power of the system, improving the accuracy of system efficiency calculation.

3. **Improved discrete gradient descent algorithm**: An improved discrete gradient descent algorithm is proposed to accelerate the search for the optimal current angle and improve its accuracy. This algorithm has an adaptive step size and can provide more accurate and efficient calculation results, thus achieving a faster search speed.

4. **Experimental verification**: The effectiveness of the proposed method is verified through experimental and simulation evaluations, especially the performance under different load conditions.

### Formula summary

- **System efficiency calculation formula**:
\[
\eta=\frac{\omega_m T_e}{U_{dc}I_{dc}}
\]
where $\omega_m$ is the actual angular velocity of the motor, $T_e$ is the electromagnetic torque output by the motor, and $U_{dc}$ and $I_{dc}$ are the DC - side voltage and current respectively.

- **Electromagnetic torque calculation formula**:
\[
T_e = \frac{3}{2}p(\psi_f i_{oq}+(L_d - L_q)i_{od}i_{oq})
\]
where $p$ is the number of pole pairs of the motor, $\psi_f$ is the magnetic flux linkage, and $L_d$ and $L_q$ are the d - axis and q - axis inductances respectively, and $i_{od}$ and $i_{oq}$ are the d - axis and q - axis output currents respectively.

- **Key formulas in the improved discrete gradient descent algorithm**:
\[
m = U^*_d i_{od}+U^*_q i_{oq}-R_s(i_q i_{oq}+i_d i_{od})-(D_d i_{od}+D_q i_{oq})V_d
\]
\[
\eta=\left(1 + \frac{R_s}{R_c}\right)k_1-\frac{1}{R_c}(k_2 + k_3)
\]
where
\[
k_1=[U^*_d i_d+U^*_q i_q - R_s I_s^2-V_d(D_d i_d+D_q i_q)]
\]
\[
k_2 = U^*_d^2+U^*_q^2 - R_s(U^*_d i_d+U^*_q i_q)
\]
\[
k_3=-V_d(D_d U^*_d+D_q U^*_q)
\]

Through these innovations, the paper aims to provide a more accurate and efficient efficiency optimization method for the PMSM drive system.