Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

VISCOSITY COEFFICIENTS IDENTIFICATION OF COMPOSITES CONSISTING OF CARBON FIBER & RESIN

Viscoelastic Bilinear Cohesive Model and Parameter Identification for Failure Analysis of Adhesive Composite Joints

New Method for Interfacial Evaluation of Carbon Fiber/Thermosetting Composites by Wetting and Electrical Resistance Measurements

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

On the Static and Dynamic Properties of Fiber-Reinforced Polymer Composites: A Three-Phase Constitutive Model

RESEARCH ON THE SPECIFIC VISCOSITY OF SEMI-CONCENTRATED FIBER SUSPENSIONS

Damping Model of Fiber Reinforced Composites and Factors Affecting Damping and Dynamic Response

Characterization and modelling of the damping properties of composite structures based on flax fibers

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

Constitutive modeling for linear viscoelastic fiber-reinforced composites

Prediction Of The 3-D Effective Damping Matrix And Energy Dissipation Of Viscoelastic Fiber Composites

A NEW RUBBER-CORD COMPOSITE MODEL AND THE CORRESPONDING PARAMETER IDENTIFICATION SCHEME

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

Viscosity‐coupled curing simulation model for L‐shaped composites considering flow and compaction

An Efficient Multi-parameter Synchronous Identification Method for Fiber-Reinforced Laminated Structure Based on Improved Levenberg–Marquardt Algorithm and Modal Data

Viscoelastic Evaluation of Composite Materials by Non-Contact Air Coupled Ultrasonic Transmission Method

A method for predicting thermal expansion coefficients of carbon fiber/epoxy composites with void defects

PREDICTION OF 3-D DAMP MATRIX AND ENERGY DISSIPATION OF VISCOELASTIC FIBER COMPOSITES

Investigation of Viscoelastic Guided Wave Properties in Anisotropic Laminated Composites Using a Legendre Orthogonal Polynomials Expansion−Assisted Viscoelastodynamic Model

Improving damping performance of fiberglass-reinforced resin matrix composites by designing viscoelastic sandwich layer