Abstract:Low and medium temperature pyrolysis technology is an important way of clean and utilization of low metamorphic coal. In this paper, three kinds of char samples were prepared in tube furnace according to different pyrolysis temperatures, and their combustion characteristics were compared by means of thermal analysis. Three modeless kinetic methods, KAS, FWO and Fredman, were used to study the combustion reaction activity under nonisothermal conditions from TG curve and DSC curve. In the end, Malek method is used to explore the mechanism function of the reaction process, and the results are analyzed numerically. The objective programming model and MATLAB are used to calculate the combined mechanism function of the reaction process. The results show that with the increase in the pyrolysis temperature, the combustion of char gradually shifts to the high temperature zone and shows a secondary effect between the volatile matter and the combustion characteristic temperature. The results show that the flammability index and burnout index increase first and then decrease, and the char prepared at 550 °C has the most developed pores and the best combustion performance with the increase in pyrolysis temperature, the average reaction activation energy decreases first and then increases, and the char prepared at 550 °C has the lowest activation energy. When the combustion heating rate is 5 °C min<sup>−1</sup>, the experimental curve and theoretical curve have a higher coincidence, and the combined mechanism function is adopted. The number is more suitable than the single most probable mechanism function to describe the combustion process of char. At this heating rate, the fuel reaction conforms to Z–L–T equation and reaction order model, which is limited by three-dimensional diffusion and chemical reaction. The distribution coefficients of the combined mechanism function are 0.4207 and 0.5886.

Safety Analysis Of Non-Isothermal Three-Variable Auto-Catalytic Chemical Kinetic Model

KINETICS OF P-Xylene LIQUID PHASE CATALYTIC OXIDATION (Ⅳ)KINETICS FOR PX AND SOLVENT BURNING

KINETICS OF P-Xylene LIQUID PHASE CATALYTIC OXIDATION(I) REACTION MECHANISM AND KINETIC MODEL

Analysis of the Autoignition Process under the Industrial Partial Oxidation Conditions Using Detailed Kinetic Modeling

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Chemical kinetic model reduction based on species‐targeted local sensitivity analysis

Chemical Kinetic Model for Ignition of Three-Component Fuel Comprising Iso-Octane/N-Heptane/Ethanol

On the Development of Detailed and Reduced Reaction Mechanisms for Combustion Modeling

Numerical Methods for Complicated Chemical Mechanism Involved in Combustion Simulation

Identifying chemical kinetics contributions to unstable behaviors of a methane-burnt combustion system

COMPREHENSIVE DESCRIPTION OF CHEMISTRY IN COMBUSTION MODELING

Construction and Analysis of A Chemical Kinetic Model for Monomethylhydrazine/Nitrogen Tetroxide Reactions

Mathematical Modeling of a Self-Oscillating Catalytic Reaction in a Flow Reactor

Kinetical driving force analysis of unstable combustion behavior in ammonia/hydrogen blending system

Artificial Neural Network Aided Unstable Combustion State Prediction and Dominant Chemical Kinetic Analysis

Reduction of chemical mechanism and kinetics analysis for ignition of RP-3 aviation kerosene in partially catalyzed hydrogen peroxide

A simplified chemical kinetic model with a reaction mechanism based on a multidimensional average error iteration method for ammonia and ammonia/hydrogen combustion

Kinetic Modeling of Thermal Oxidation and Coking Deposition in Aviation Fuel

A Reduced Combustion Kinetic Model for the Methanol-Gasoline Blended Fuels on SI Engines

Numerical analysis of kinetics of char combustion process and selection of mechanism functions

Assessment of H2-CH4-air Mixtures Oxidation Kinetic Models Used in Combustion