Abstract:Poly (styrene-co-acrylic acid) (PSA )/MgCl2 complex was coated on TiCl3 catalyst (SLC-S catalyst) supported on SiO2 using sol-gel method,and the Ziegler-Natta hybrid catalysts were prepared.The resulting catalysts were characterized by a series of techniques,namely Fourier transform infrared spectroscopy (FTIR),laser scattering particle analyzer and scanning electronic microscopy (SEM).It was found that the hybrid catalysts had a core-shell structure and the thicknesses of membrane of HC-5 (PSA/SLC-S = 5 wt% ) catalyst and HC-20 (PSA/SLC-S = 20 wt% ) catalyst were 1.5 and 3 μm,respectively.Three different kinds of catalysts were used for gas phase ethylene polymerization.The effects of thickness of the membrane in hybrid catalysts on the activity and the profile of the polymerization kinetic curves of the catalysts were investigated.The results indicated that the HC-20 catalyst had a good ethylene polymerization activity and its kinetic curve was stable with an inductive period,while HC-5 catalyst demonstrated a fast decay during polymerization and its activity and kinetic curve both resembled the traditional TiCl3 catalyst.Besides,the properties of the polyethylene made by hybrid catalysts under different hydrogen contents were obtained.It is obvious that the thickness of membranes could affect the hydrogen response of the hybrid catalysts and the molecular weight distribution of the resultant polyethylene.

Silane Bridged Polymerized Metallocene Catalyst for Ethylene Polymerization

Polymer immobilized silane bridged metallocene catalysts for ethylene polymerization

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Aluminum bis(iminophosphorano)methanide and methandiide complexes—transition metal-free ethylene polymerization cationic catalyst precursors

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Ethylene polymerization with metallocene/late transition metal combined catalysts

TiCl4 Immobilized on a Composite Support SiO2/MgCl2·x(1,4‐butanediol)/poly[styrene‐co‐(acrylic Acid)] for Ethylene Polymerization: the Barrier Effect of Poly[styrene‐co‐(acrylic Acid)]

Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

REMARKABLY ACTIVE NON-METALLOCENE ETHYLENE POLYMERIZATION CATALYSTS

Immobilizing TiCl3/(n-BuCp)2ZrCl2 catalyst on organic/inorganic support for gas-phase ethylene polymerization

Self-immobilized metallocene catalysts bearing an allyl group for ethylene polymerization, X-ray crystal structure of [(CH2CHCH2)CH3Si(C13H8)2]ZrCl2

PREPARATION OF NOVEL POLYETHYLENE-graft-POLY(4-VINYLPYRIDINE)-SUPPORTED METALLOCENE CATALYSTS FOR ETHYLENE POLYMERIZATION

Immobilization of a Zirconium Complex Bearing Bis(phenoxyketimine) Ligand on MCM-41 for Ethylene Polymerization

A Kind of Novel Nonmetallocene Catalysts for Ethylene Polymerization

Silica-Supported Nickel and Zirconium Catalysts for Branched Polyethylene

A kind of novel nonmetallocene catalysts for ethylene polymerization Part A Polymer chemistry

Ethylene Polymerization and Ethylene/1-Hexene Copolymerization Using Homogeneous and Heterogeneous Unbridged Bisindenyl Zirconocene Catalysts

Preparation of silica-supported late transition metal catalyst and ethylene polymerization

Polymerized unsymmetrical iron post-metallocene catalyst for ethylene polymerization

Study On Propylene Polymerization Using Unbridged Metallocene Catalysts

Novel polystyrene-supported zirconocene catalyst for olefin polymerization and its catalytic kinetics