Abstract:Large-scale volumetric fracturing is generally used during shale gas development. The return rate of fracturing fluid is low, and a large amount of slickwater is retained in the reservoir. The adsorption and desorption of partially hydrolyzed polyacrylamide (HPAM), an additive commonly used in slickwater, on the surface of shale was studied using Longmaxi shale from the Sichuan Basin. The experimental results showed that the mass ratio of the HPAM solution to shale reached saturation adsorption at 20:1 when the concentration of HPAM solution was 1000 mg/L and 25:1 when the concentration of HPAM solution was 500 mg/L. The mass ratio of the HPAM solution to shale was fixed at 25:1, and the adsorption equilibrium was reached at a HPAM concentration of 1000 mg/L when the aqueous solution temperature was 30 °C and 800 mg/L when the aqueous solution temperature was 60 °C. The Langmuir adsorption model yielded a better fit than the Freundlich adsorption model. The adsorption equilibrium time at 30 °C was at 60 min for a HPAM concentration of 500 mg/L, while for a concentration of 1000 mg/L, it was at 90 min. The adsorption equilibrium time at 60 °C was 40 min for a HPAM concentration of 500 mg/L, whereas it was 60 min for a HPAM concentration at 1000 mg/L. The pseudo-second order (PSO) kinetics model yielded better fits than the pseudo-first order (PFO) kinetics model. The adsorption of HPAM on shale was strong, and the adsorbed HPAM resembled cobwebs adhering to the shale surface. HPAM on the surface of shale after adsorption was able to resist the desorption capacity of water. However, when the amount of adsorbed HPAM on shale increased significantly, the amount of residual HPAM on the surface of the shale decreased rapidly during desorption in deionized water. The desorption of HPAM on the shale surface followed a modified desorption model. The higher the concentration of HPAM adsorbed on the shale surface was, the easier it was to desorb and the easier it was to be removed from the shale.

A Study of Adsorption Consumption of Polyacrylamide on Reservoir Minerals

Adsorption and Desorption Behavior of Partially Hydrolyzed Polyacrylamide on Longmaxi Shale

Adsorption of Anionic Polyacrylamide on the Surface of Ion Exchange Membranes

Static Adsorption Property of Dimethylamine on Ion Exchange Resin

Adsorption Characteristics of Polyacrylamide in Low Concentration Zone on Clay Minerals.

Treatment of Dyeing Wastewater by Polyacrylamide/Diatomite Composite

Study on the adsorption of humic acid using polymeric adsorbent modified by amin

Study on treatment of DMA containing wastewater with ion exchange resin

Adsorption-desorption behavior of the hydrophobically associating copolymer AM/APEG/C-18/SSS

Kinetics and Equilibrium Adsorption Studies of Dimethylamine (DMA) Onto Ion-Exchange Resin

Adsorption of Polyetheramine-230 on Expansive Clay and Structure Properties Investigation

Property of adsorption about ammonium on suspended mineral matters in eutrophic water]

Synthesis and Application of Modified Polyacrylamide with High Content of Hydroxamate Groups and Performance

Research on adsorption of high concentration PAM solution to natural Na-bentonnite

Flocculation of kaolin suspension with the adsorption of N,N-disubstituted hydrophobically modified polyacrylamide

Study on the Effects of Polyacrylamide on Phosphorus Adsorption and Desorption Characteristics of Soil Aggregates

Interaction between PAM and kaolinite (0 0 1) surface in aqueous solution, insights from DFT and MD simulations

A Comparative Study on the Adsorption of 8-Amino-1-naphthol-3,6-disulfonic Acid by a Macroporous Amination Resin

Atomic Force Microscopy and Molecular Dynamic Simulation of Adsorption of Polyacrylamide with Different Chemistries onto Calcium Carbonate

Adsorption Characteristics of Polymer Solutions on Media Surfaces and Their Main Influencing Factors

Effect of polyacrylamide on phosphorus adsorption, desorption and translocation