Abstract:Using sodium bisulfite aqueous solution as extractant, the reactive extraction experiments for a heptaldehyde-undecane mixture were carried out. The results show that when the molar ratio between sodium bisulfite and heptaldehyde, the stirring speed, the volume fraction of aqueous phase or the temperature increase, the reactive extraction rate increases. In contrast, larger molar ratio between sodium bisulfite and heptaldehyde, smaller volume fraction of aqueous phase or lower temperature leads to higher equilibrium conversion of heptaldehyde. According to the mass transfer coefficients of the reactive extraction system and the rate constants obtained from the study of intrinsic kinetics, the Ha numbers were estimated. The results show that under the conditions in this paper, 0.3 < Ha < 3, the reactive extraction process was mainly a mixing control process. Since heptaldehyde is soluble in water while sodium bisulfite is not soluble in undecane, the reaction occurs within the film and the main body of the aqueous phase. For the reactive extraction of 1.0 wt % heptaldehyde in undecane using aqueous sodium bisulfite as the extractant, three methods of performing three-stage reactive extraction were investigated. The results showed that equilibrium extraction is highly necessary to ensure the extraction efficiency. Cross-current equilibrium extraction is suitable for situations where high product purity is required; for situations where the separation requirements are not too high, counter-current equilibrium extraction should be preferred.

Study of Continuous Countercurrent Extraction of Hydrocortisone with Centrifugal Extractor

Extraction of Hydrocortisone from the Fermentation Liquor with Annular Centrifugal Contactors

Mass Transfer Enhancement in Non‐dispersive Solvent Extraction with Helical Hollow Fiber Enabling Dean Vortices

Research on technological process of two-pot countercurrent extraction of hydroxysafflor yellow A

Study of the characteristics in continuous annular extraction chromatography

Preparative Separation of Hydrocortisone and Its Stereoisomer by High‐Speed Countercurrent Chromatography

Sinomenine Purification by Continuous Liquid-Liquid Extraction Process with Centrifugal Extractors

Continuous Counter-Current Multistage Microextraction in a Novel Tube-In-Tube Microextractor

Extraction of Caffeine with Annular Centrifugal Contactors

Microdroplet-based continuous countercurrent extraction with high phase ratio

Separation of trace n-hexane from acid aqueous solution by centrifugal extraction

Study on the Reactive Extraction Process for Heptaldehyde–Undecane–Sodium Bisulfite Aqueous Solution System

Separation of Hydrocortisone and Its Steroisomer from Fermentation Liquor by Chloroform Extraction Process

Liquid-liquid Extraction Intensification by Micro-Droplet Rotation in a Hydrocyclone.

Study on treating phenolic wastewater with annular centrifugal extractor

Experimental and Simulation Study on the Extraction of P-Cresol Using Centrifugal Extractors

Separation of cobalt and nickel via solvent extraction with Cyanex-272: Batch experiments and comparison of mixer-settlers and an agitated column as contactors for continuous counter-current extraction

Recent Progress in Hydrodynamic Characteristics Research and Application of Annular Centrifugal Extractors

Cocurrent and Countercurrent Extraction Based on a Novel Three-Dimensional Vortex Microextractor

Study on the Separation of Binary Azeotropic Mixtures by Continuous Extractive Distillation

Hydraulic and Mass-Transfer Performance of A 20-Mm-diameter Annular Centrifugal Contactor for the Solvent Extraction of Cesium by Bis(2-Propyloxy)Calix[4]-Crown-6 in N-Octanol