Abstract:To partition effectively Cs(I) and Sr(II), two harmful heat emitting nuclides, from a highly active liquid waste by extraction chromatography, two kinds of macroporous silica-based polymeric materials, Calix[4]arene-R14/SiO2-P and TODGA/SiO2-P, were synthesized. Two chelating agents, 1,3-[(2,4-diethyl-heptylethoxy)oxy]-2,4-crown-6-calix[4]arene (Calix[4]arene-R14), an excellent supramolecular compound having molecular recognition ability for Cs(I), and N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) were impregnated and immobilized into the pores of SiO2-P particles support by a vacuum sucking technique. The loading and elution of 11 typical simulated fission and non-fission products from 4.0M or 2.0M HNO3 were performed at 298K. It was found that in the first column packed with the Calix[4]arene-R14/SiO2-P, all of the simulated elements were separated effectively into two groups: (1) Na(I), K(I), Sr(II), Fe(III), Ba(II), Ru(III), Pd(II), Zr(IV), and Mo(VI) (noted as Sr-group); (2) Cs(I)–Rb(I) (Cs-group) by eluting with 4.0M HNO3 and distilled water, respectively. The harmful element Cs(I) flowed into the second group along with Rb(I) because of their close sorption and elution properties towards Calix[4]arene-R14/SiO2-P, while Sr(II) showed no sorption and flowed into Sr-containing group. In the second column packed with TODGA/SiO2-P, the Sr-group was separated into (1) Ba(II), Ru(III), Na(I), K(I), Fe(III), and Mo(VI) (non-sorption group); (2) Sr(II); (3) Pd(II); and (4) Zr(IV) by eluting with 2.0M HNO3, 0.01M HNO3, 0.05M DTPA–pH 2.5, and 0.5M H2C2O4, respectively. Sr(II) adsorbed towards TODGA/SiO2-P flowed into the second group and showed the excellent separation efficiency from others. Based on the elution behavior of the tested elements, an advanced PREC (Partitioning and Recovery of two heat generators from an acidic HLW (high activity liquid waste) by Extraction Chromatography) process was proposed.

Hydraulic and Mass-Transfer Performance of A 20-Mm-diameter Annular Centrifugal Contactor for the Solvent Extraction of Cesium by Bis(2-Propyloxy)Calix[4]-Crown-6 in N-Octanol

Removal of Cesium by Countercurrent Solvent Extraction with A Calix[4]Crown Derivative

Effective Separation of Cesium with a New Silica-Calix[4]biscrown Material by Extraction Chromatography

Hydraulic characteristics of <i>n</i>-octanol/aqueous solution systems in a 25-mm annular centrifugal extractor

Hydraulic characteristics of n-octanol/aqueous solution systems in a 25-mm annular centrifugal extractor

Effective Removal of Cesium by New Functionalized 1,3-Alternate Calixcrown Materials Immobilized on a Silica Carrier

Development of the chromatographic partitioning of cesium and strontium utilizing two macroporous silica-based calix[4]arene-crown and amide impregnated polymeric composites: PREC partitioning process.

Solvent Extraction of Cesium with A New Compound Calix[4]Arene-Bis[(4-Methyl-1,2-Phenylene)-Crown-6]

Extraction Behavior of Cesium and Some Typical Fission and Non-Fission Products with a New 1,3-Di(1-decyloxy)-2,4-crown-6-calix[4]arene

Development of a new simultaneous separation of cesium and strontium by extraction chromatograph utilization of a hybridized macroporous silica-based functional material

Chromatographic Partitioning of Cesium by a Macroporous Silica‐calix[4]arene‐crown Supramolecular Recognition Composite

Chromatographic Separation of Cesium by a Macroporous Silica-Based Supramolecular Recognition Agent Impregnated Material

Synthesis and Application of A Macroporous Silica-Based Polymeric Octyl(Phenyl)-N,N-Diisobutylcarbamoylmethylphoshine Oxide Composite for the Chromatographic Separation of High Level Liquid Waste

Partitioning of Cesium from a Simulated High Level Liquid Waste by Extraction Chromatography Utilizing a Macroporous Silica‐Based Supramolecular Calix[4]arene‐Crown Impregnated Polymeric Composite

Extraction of Cesium and Some Typical Metals with a Supramolecular Recognition Agent 1,3-Bis(1-nonyloxy)-2,4-crown-6-calix[4]arene

SPEC: A New Process for Strontium and Cesium Partitioning Utilizing Two Macroporous Silica-Based Supramolecular Recognition Agents Impregnated Polymeric Composites

Extracting Performance of Cesium by 25,27‐Bis(2‐Propyloxy) Calix[4]‐26,28‐Crown‐6 (iPr‐C[4]C‐6) in n‐octanol

Extraction behavior of cesium from nitric acid medium with calix[4]- bis [(4- tert -butyl-1,2-phenylene)-crown-6]

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Co-extraction of strontium and cesium from simulated high-level liquid waste (HLLW) by calixcrown and crown ether

Adsorption of Cesium and Some Typical Coexistent Elements Onto a Modified Macroporous Silica-Based Supramolecular Recognition Material.