Abstract:The aim of the study was to develop a design methodology for the UltraHigh Molecular Weight Polyethylene (UHMWPE)-based composites used in friction units. To achieve this, stress–strain analysis was done using computer simulation of the triboloading processes. In addition, the effects of carbon fiber size used as reinforcing fillers on formation of the subsurface layer structures at the tribological contacts as well as composite wear resistance were evaluated. A structural analysis of the friction surfaces and the subsurface layers of UHMWPE as well as the UHMWPE-based composites loaded with the carbon fibers of various (nano-, micro-, millimeter) sizes in a wide range of tribological loading conditions was performed. It was shown that, under the “moderate” tribological loading conditions (60 N, 0.3 m/s), the carbon nanofibers (with a loading degree up to 0.5 wt.%) were the most efficient filler. The latter acted as a solid lubricant. As a result, wear resistance increased by 2.7 times. Under the “heavy” test conditions (140 N, 0.5 m/s), the chopped carbon fibers with a length of 2 mm and the optimal loading degree of 10 wt.% were more efficient. The mechanism is underlined by perceiving the action of compressive and shear loads from the counterpart and protecting the tribological contact surface from intense wear. In doing so, wear resistance had doubled, and other mechanical properties had also improved. It was found that simultaneous loading of UHMWPE with Carbon Nano Fibers (CNF) as a solid lubricant and Long Carbon Fibers (LCF) as reinforcing carbon fibers, provided the prescribed mechanical and tribological properties in the entire investigated range of the “load–sliding speed” conditions of tribological loading.

Study on the Properties of UHMW-PE Modified by Stuffing

Investigation of mechanical and wear properties of kaolin filled UHMWPE composites

Study on the erosion wear characteristics and mechanisms of UBHMWPE/kaolin composites

Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding

Tribological Properties of Self-Reinforced Ultra-High Molecular Weight Polyethylene Composites

An Investigation on Tribological Properties and Mechanical Properties of UHMWPE/polycrystalline Mullite Fiber

Improved Tribological Properties of Poly(methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment

Effect of PEW and CS on the Thermal, Mechanical, and Shape Memory Properties of UHMWPE

Increasing Wear Resistance of UHMWPE by Loading Enforcing Carbon Fibers: Effect of Irreversible and Elastic Deformation, Friction Heating, and Filler Size

Mechanical and tribological behaviors of UHMWPE composites filled with basalt fibers

Tribological Property and Tensile Properties of MPU/UHMWPE Blends

Mechanism of Size Effects of a Filler on the Wear Behavior of Ultrahigh Molecular Weight Polyethylene

Significant sliding speed effect on the friction and wear behavior of UHMWPE matrix composites

Tribological Characteristics of UHMWPE Com-Posite and Relationship with Its Compressive Be-Havior

A Comprehensive Review of Ultrahigh Molecular Weight Polyethylene Fibers for Applications Based on Their Different Preparation Techniques

Carbon fiber/nano SiO 2 reinforced polyelectrolyte-graft UHMWPE for water lubricated superlubricity

Carbon Fiber/nano SiO2 Reinforced Polyelectrolyte-Graft UHMWPE for Water Lubricated Superlubricity

Enhancement of Underwater Tribological Behavior of Hybrid Fabric Composites Using Ultrahigh Molecular Weight Polyethylene and Different Fillers

Increasing the Resistance of HDPE to Abrasive Wear with Small Additions of UHMWPE

Friction and Wear Behaviors of PTFE-based Composites Filled with Polymers

Friction And Wear Behavior Of Polyetherimide(Pei) Filled With Polytetrafluoroethylene(Ptfe)